• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Musicman Stingray problems

"Sounds" like dead battery, but you say you put a fresh battery in. I'd double check the battery just to make sure.

If the battery is fresh, my next guess is output jack. +1 to learning how to use a soldering iron, or have a friend do it. Easy fix, the jack is only a couple bucks.

I did have an EBMM with a bad solder connection in the pre once though.

So:
1) double check battery
2) output jack
3) call EB about a new pre.

-M
 
Sometimes the battery pins don't make proper contact with the battery. Make certain there's enough spring pressure on the battery clip there to make contact. I would clean everything too, use a q-tip and clean the contacts in the jack.

If worse comes to absolute worse, and the preamp is indeed bad, I was told a new factory supplied replacement costs about $75 bucks with trade-in of your old unit.

Interesting. I'll try that, thanks.
 
Here's a pic of the Musicman and my other basses for those who were wondering how it looked like.
 

Attachments

  • SDC12487.jpg
    SDC12487.jpg
    50.1 KB · Views: 116
Check the jack. Mine wore out after a while. It have a weird distortion sound. It was about a $100 repair including parts and labor.

:eek: You got ripped off hard if you spent that much to repair a jack. The jack should only cost about 5 bucks, and it only takes about 5 minutes to change if you know what you're doing. $5 parts + $95/ 5 minutes labor.... Time to find a new repairman or learn how to use a soldering iron.

The nerve some guys have, charging people that much...
 

Latest posts