• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

Post your 1590a (tiny pedals) pedalboard

#141
image.jpg
image.jpg So just finished another board. I had a sadowsky pre-di but wanted a smaller pre to allow for another pedal
Mini poly tune >Mxr m-81 pre I added an mxr pre. It was the same eq points as the sadowsky. 40 and 4K with the added mid. I dialed that down to match the sadowsky. > a John K little overdrive pedal > myth fx infinium envelope filter >tc mini corona > tc spectra comp.
 
  • Like
Reactions: gscroggin, BigBeatNut and Flabzilla
#142
Here it is:

Line 6 G30, One Control Mosquite Blender, Eno Metalistik (For now - Eno Trouble OD enroute), Mooer Thunderball, Bass Sweeper, Ninety Orange, Ensemble Queen, Tom'sline Mod Station and Bass Compressor. That's a Poly Cutting Board with four tall rubber feet screwed into the rear edge. Powered by a One Spot. All of the pedals are secured with 3M clear dual-lock. Fits in a 15" Targus laptop bag. I haven't had a chance to gig with it yet, but it sounds pretty good so far.

20161015_180153.jpg
 
  • Like
Reactions: Farrin D and Flabzilla
#145
Damnit! My post got wiped out. :mad:
TB-software has been really glitchy lately with weird stuff going on such as alerts and notifications not working properly.

I had already suggested the TC E Spectracomp, MythFX Filter, and a PolyTune/Korg minituner – and mount the Thumpinator underneath...

Which would then in turn give you enough room for

FOUR more 1590As!
 
  • Like
Reactions: loopee
#148
14963405459831487462149.jpg
So now I'm going all in here. My new 1590A board was made for me by a local Craftsman. It's a piece of cherry cut with rounded edges and corners. He mounted some cabinet door handles and I attached rubber feet to the front. My inventory includes a Moen 1Loop effects switcher, Mooer Tender Octaver, Dinner Obsessive OD, Mooer Thunderball, Mooer Bass Fog, Mooer Sweeper, Mooer Ninety Orange, Mooer Ensemble Queen, Madbean Afterlife, and my Line 6 G30 receiver. I have some more low profile cables on order. I use two 1 spot power supplies to make sure I have plenty of juice on tap. I could potentially power 3 more pedals but I only have room for one.
 
#151
20170807_154309.jpg
Ok. Here we go again. Even smaller! Line6 G30, Mooer Tender Octaver, Mightysound M3 Fuzz, Mooer Bass Sweeper, Tom'sline Engineering Mod Station, and Madbean Afterlife Comp. Surprisingly, the fuzz sounds great and has a clean blend. All the dirt I really need. And only $19 plus shipping. The mod station does a pretty good job for chorus, flange, and phaser. The board is an Ammoon and cost less than $30 shipped. This set up works really well for gigs. It's a keeper. My earlier board is going to be put to good use for different effects.
 
  • Like
Reactions: cosmicevan, Jonny_Orange, Farrin D and 2 others
#152
Very nice setup, I'm in the process of getting my mini board planned and setup. I just looked through all the pages in this thread and it seems like the Mooer Bass Sweeper is one of the most popular mini pedals. What's your opinion on a "must have"?
 
#153
Mr. Majestic said:
Very nice setup, I'm in the process of getting my mini board planned and setup. I just looked through all the pages in this thread and it seems like the Mooer Bass Sweeper is one of the most popular mini pedals. What's your opinion on a "must have"?
Click to expand...

A "must have" is tough to choose. I really like the Tender Octaver but they are tough to find now. That and M3 Fuzz are my 'must have". The Bass Sweeper is really cool too, though some claim it to be tough to dial in. I'd recommend the Donner Jet Convolution flanger if that's something you're in to. I hear that the Broughton Monocle is the compressor to have. You can go on forever with dirt pedals. The Donner Obsessive is a good OCD clone. The One Control Hooker's Green Bass Machine sounds great too. I was using a cutting board that fit in a Targus laptop bag that I could easily load 10 mini pedals on. I have some pedals that I'd be willing to part with. PM if you'd like a list.
 
#156
cnltb said:
What's the white sfx pedal between red dragon and micro fuzz?
Click to expand...

Sfx custom Stage 4 - it was originally made to add some lows back to a fuzz that lost some lows but it has a ton of other features - basically it's a nice preamp with a super natural EQ curve. You can use it as a boost, a bass boost, a preamp, a line driver, you can add or remove sub frequencies, etc. Nice utility pedal that sounds great in a bunch of places.
 
  • Like
Reactions: BigBeatNut, loopee and Mr. Majestic
#157
Mosfed said:
Sfx custom Stage 4 - it was originally made to add some lows back to a fuzz that lost some lows but it has a ton of other features - basically it's a nice preamp with a super natural EQ curve. You can use it as a boost, a bass boost, a preamp, a line driver, you can add or remove sub frequencies, etc. Nice utility pedal that sounds great in a bunch of places.
Click to expand...
Thanks!
The fuzz loses bottom end?
 

Latest posts

Top Bottom
Back