jay_t said:You have to get shoes with little extender pads on the bottom.
actually i use my hands for the pedals. i play the bass with my feet
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Post Your Pedalboard - Part I
- Thread starter The Chancellor
- Start date
- Status
actually i use my hands for the pedals. i play the bass with my feet
xan said:actually i use my hands for the pedals. i play the bass with my feet
Is that where the term "funky bass" came from?
syciprider said:
Well I have one of the most tightly packed pedalboards here, there are a few things that come into it, any board with a slant will help, careful lineing up of pedals and trying them out as you put them on the board, and finally Converse All Stars probably the best shoes for playing with effects
xan said:actually i use my hands for the pedals. i play the bass with my feet
I knew I was doing it wrong :scowl: .
Thanks! Now I can get the funk!
Hey TaySte, would you mind giving a run down of your signal path? Mighty fine setup you have there!
Barber LTD Overdrive into
Catalinbread Teaser Stallion into
Zoom Ultra Fuzz into
Dirtbox with 4 effect loops setup
Loop 1 is Dod fx25 into Crowther Prunes and Custard into 18v Danelectro Cool Cat
Loop 2 bypasses all other loops and is just clean incase things start going wrong.
Loop 3 is MXR Bass Auto Q into DOD FX35 Octoplus into Aria FL-10 Flanger into EBS Bass IQ
Loop 4 is one of the Dirtbox's distortion channels I usually set this for a very high gain
This then goes out into the Line 6 Echo Park then into the Boss DD-20 then into the Maneco Nanolooper 32 and then into the EBS Multi Comp (Set for 2 band compression) then into the MXR M-80 Bass DI (Set up for a 2 clean channel operation) and the parallel out goes to the Boss TU-2 tuner so that that isn't in my signal chain at all.
Not all that complex, but lots of fun.
Hope this helps
Catalinbread Teaser Stallion into
Zoom Ultra Fuzz into
Dirtbox with 4 effect loops setup
Loop 1 is Dod fx25 into Crowther Prunes and Custard into 18v Danelectro Cool Cat
Loop 2 bypasses all other loops and is just clean incase things start going wrong.
Loop 3 is MXR Bass Auto Q into DOD FX35 Octoplus into Aria FL-10 Flanger into EBS Bass IQ
Loop 4 is one of the Dirtbox's distortion channels I usually set this for a very high gain
This then goes out into the Line 6 Echo Park then into the Boss DD-20 then into the Maneco Nanolooper 32 and then into the EBS Multi Comp (Set for 2 band compression) then into the MXR M-80 Bass DI (Set up for a 2 clean channel operation) and the parallel out goes to the Boss TU-2 tuner so that that isn't in my signal chain at all.
Not all that complex, but lots of fun.
Hope this helps
British build 4 channel loooper and distortion type box capable of various setups, they didn't make many mine is number 36.
I use mine as 3 clean channels and one dirty, but it can be 1 clean, 2 dirty and a tuner mute, 2 clean and 2 dirty, quite a few options really.
I use mine as 3 clean channels and one dirty, but it can be 1 clean, 2 dirty and a tuner mute, 2 clean and 2 dirty, quite a few options really.
rockstarbassist
Inactive
That's a killer setup man... I plan on keeping my 5-pedal setup until I get my Eventide fund up to par. 
Toasted said:Steve's board sucks, boo board sucks, suck board boo
love ya mate
In the words of Catherine Tate "Am I bothered tho"
hi...
normally I don't use them all at the same time, just put them together for the pic.
Link Removed
If I don't want to carry the big GT6b to concerts I only take my boss bass OD and the metal zone which i borrow from my g****r player with me.
Rocktek phaser is a present, Limiter will be sold.
greets
normally I don't use them all at the same time, just put them together for the pic.
Link Removed
If I don't want to carry the big GT6b to concerts I only take my boss bass OD and the metal zone which i borrow from my g****r player with me.
Rocktek phaser is a present, Limiter will be sold.
greets
Pretty cruddy pedals huh? I use the RP-100 for delays, and my midi controller is hooked up to that Axess you see there and my Line 6 Mod Pro. I use the works on that thing.
rockstarbassist
Inactive
Nah, the Boss' aren't all bad my friend... I plan on getting one once I rackmount my pedalboard setup and take it to my smaller gigs/practices. It'll do just fine, I do believe!!
- Status
