• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Post Your Pedalboard - Part I

Status
Not open for further replies.
As far as a "real tube overdrive" I wouldn't really be qualified to say to be honest.. I don't know that I've ever heard one and, if I did, I don't know it.

I bought it about 12 years ago mostly because it gave me a less harsh distortion than other pedals. It was more of a warm sound..

If you look closely at the pedal, on the 'drive' dial, you can set it to the second to last little dot for some fuzz and then crank it all the way for heavier distortion.

I don't know if that helped any.. :(
 
Ok bit of a major change

here you can see my two boards. Band Board (left) and Solo Board (right)

j09w1j.jpg


and here they are more separated

Band Board

j09vyx.jpg


Solo Board

j0a2kw.jpg


and in the middle are the pedals I've got lying around not sure what to do with them yet, will most likely place the prunes & custard on my solo board.

Enjoy
 
Current Rig (it's relativly simple now):

MyCurrentRig.gif


I Use the Wah as a band filter.

In the next 6 months or so I should acquire a compressor (used as a sustainer) and a SansAmp ParaDriver. I'm getting the ParaDriver for the Mid control, cus I'd probably never use the presence (my current amp doesn't have it either). Also buying the SansAmp as a replacement of my ****tacular amp (mine has no drive control) and as a DI. Hoping to be able to use it as both at the same time because of the level selector switches for each out.

GAS Induced Rig:

MyFinalRig.gif


I put in the CS-3 as a filler so that I could post this but I've only settled on having Level, Attack, Comp controls. The MXR Super Comp is another option.
 
wow i finally get to bring something to the table with this one, its simple and does the trick for my band... ihave more pedals but these are the ones that get hte most use

ill post another pic of my board when i finish building my Marshall Guvnor Mk1 and finish the rehouse on my big muff, but for now heres what i use

Link Removed
 
jamesblue said:
Budonze, you've got that FT BD set to Kill.
I've got one and when you turn up that second
boost knob, watch out!!
:bassist:
haha ya, i was just messing around with my guitar with my board before takin the picture, it pretty much just thickens up the sound when you boost with guitar, but when you have a bass on it, look out, it will kill small woodland creatures in a 20 foot radius. ive accidentally tripped it a couple times and barely kept my speakers in my cab
 
Higgie said:
Ok, got the Tech21 Bass XXL and the actual board itself for Xmas, am well happy with them both :D

[Invalid or Expired Link Removed]
[Invalid or Expired Link Removed]

Already ordered a Godlyke Power All, and then I'll get the Line 6 Echo Park and my board will be complete....For now... :P


EET'S SO BEEEEEEEEEEG!!!!!!

/accent


Anyways, pics of my new pedalboard will be posted as soon as it's finished. I just ordered the locking Neutrik Jacks and I bought all the electrical jacks today.

EDIT: Hey does the XXL clip harder the harder you play like you said it might?
 
I just rewired the bunch of stuff laying around my room.

Here's what it looks like :
Link Removed

The EHX Frequency Analyzer is in fact not wired, I want it in // with the distortion and the G5, but the LS-2 only has 2 loops...

I have to make a custom looper for all this.
 
Higgie said:
Ok, got the Tech21 Bass XXL and the actual board itself for Xmas, am well happy with them both :D

pedalboardwithlid.jpg

pedalboard.jpg


Already ordered a Godlyke Power All, and then I'll get the Line 6 Echo Park and my board will be complete....For now... :P


Nice, may I ask where you purchased that from and what are the dimensions to it? I 'm making my own and I need something to work off of.


Petary, the pics wont show.
 
Status
Not open for further replies.