Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Post Your Pedalboard - Part III
- Thread starter David Wilson
- Start date
- Status
Nice. I liked the cube better from a while back, but this is a good alternative for those not so craffty to make the cube. Is that a pedal train board?
1) yes it's velcro on the aluminium board
2) yes, i broke the gain pot, i'm still waiting for the replacement pot from Marshall, but i was able to set the gain amount with a screwdriver (so it's not going to move) and it works fine
3) the bdi and the bad monkey are not working now but i will try to use them with the rick 4003 one pu in the sansamp and onother one in the bdi and both to the pa, setting different sounds on each one...
what you think?
I don't have two rig for the bi-amplification but I still can send two signals to the pa..
it's silly?
2) yes, i broke the gain pot, i'm still waiting for the replacement pot from Marshall, but i was able to set the gain amount with a screwdriver (so it's not going to move) and it works fine
3) the bdi and the bad monkey are not working now but i will try to use them with the rick 4003 one pu in the sansamp and onother one in the bdi and both to the pa, setting different sounds on each one...
what you think?
I don't have two rig for the bi-amplification but I still can send two signals to the pa..
it's silly?
not at all! sounds awesome.
PS- I love Italy. i can't wait go go back there. i recorded an album in Parma!
Thanks!
Thanks man, the order is:
Bass>Fat Boost>VFB-2>Punch Factory>Korg DT-10>Amp
VFB-2 Send>Wobo 2 Looper>105Q>VFB-2 Return
Loop A: Loopmaster Mini Loop (EHX BMS)>Marshall Shred Master
Loop B: Tonefactor Hellbaby>Crowther Prunes and Custard>Chunk Brown Dog>Chunk Agent 00Funk>MXR Auto Q
That's it I think.
Nah as MysticBoo said, mine is custom. As you can see I have 3 switches rather than 2. Again as MysticBoo said, the normal ones are the same size as a LBM, or for reference from my board, the Prunes and Custard.
moogboy
Inactive
How does that POG respond to bass? I was reading an earlier post so thats why it might not make sense
The Fueltank's nice and cheap, but a little big. But no, the cord doesn't bother me. I plant my heel on the Tank when I want to switch my Muff, though it seldom goes off these days 
"I know you said current but Im going to post my old one as well.
This was my pedalboard from my noise rock band a year and a half ago:
Ernie Ball VP JR, Akai Deep Impact, Sparkle Drive, ProCo Rat II, Marshall Guvnor, Boss GEB7, MXR Phase 90, Boss CEB3, Boss BF2, MXR Dynacomp, Eden Navigator FS, Morley FS (Rackmount Sansamp RBI), Tech 21 MidiMouse (Rackmount Sansamp PSA1)
Its built on a few pieces of plywood made to drop into a Roadready mixer case. All the wirring is run under the plywood through channels I routed. The whole thing is covered in heavy duty green canvas. Im not using the same setup anymore so Im redoing the board, and re-using the case.
And this is where Im at now:
This is what it should look like when done:
EB Volume Pedal JR, Sanford and Sonny Blue beard,MXR Stereo Chorus, Akai Deep Impact, TU2, Voodoo Labs Sparkle Drive, MXR Phase 90, ProCo Rat II, Ebow
The black box in the upper left is going to have jacks installed on top and the side with the pedals permanently plugged in on the side so that I just use the jacks on top to plug my basses and amps in, instead of trying to squeeze my hand around on the board each time I setup and break down. That makes it really convenient considering the fact that I run between 2 and four signals to different amps and inputs.
I was about to click submit when the UPS dude rolled in with this!
Its a Roland PK5A Pedalboard Midi comtroller. Im going to hook it up to a Nord Electro Synth/Organ so I can play deep doomy pedal tones while still rocking a bass line. I havent picked up the Nord yet, but I'll be ordering it as soon as the Nord rep tells me how many rack spaces the unit is. 4 or less and I go rack, more than 4 and Im getting the keyboard."
Do I get some kind of award? Im so incredibly happy with my setup.
This was my pedalboard from my noise rock band a year and a half ago:
Ernie Ball VP JR, Akai Deep Impact, Sparkle Drive, ProCo Rat II, Marshall Guvnor, Boss GEB7, MXR Phase 90, Boss CEB3, Boss BF2, MXR Dynacomp, Eden Navigator FS, Morley FS (Rackmount Sansamp RBI), Tech 21 MidiMouse (Rackmount Sansamp PSA1)
Its built on a few pieces of plywood made to drop into a Roadready mixer case. All the wirring is run under the plywood through channels I routed. The whole thing is covered in heavy duty green canvas. Im not using the same setup anymore so Im redoing the board, and re-using the case.
And this is where Im at now:
This is what it should look like when done:
EB Volume Pedal JR, Sanford and Sonny Blue beard,MXR Stereo Chorus, Akai Deep Impact, TU2, Voodoo Labs Sparkle Drive, MXR Phase 90, ProCo Rat II, Ebow
The black box in the upper left is going to have jacks installed on top and the side with the pedals permanently plugged in on the side so that I just use the jacks on top to plug my basses and amps in, instead of trying to squeeze my hand around on the board each time I setup and break down. That makes it really convenient considering the fact that I run between 2 and four signals to different amps and inputs.
I was about to click submit when the UPS dude rolled in with this!
Its a Roland PK5A Pedalboard Midi comtroller. Im going to hook it up to a Nord Electro Synth/Organ so I can play deep doomy pedal tones while still rocking a bass line. I havent picked up the Nord yet, but I'll be ordering it as soon as the Nord rep tells me how many rack spaces the unit is. 4 or less and I go rack, more than 4 and Im getting the keyboard."
Do I get some kind of award? Im so incredibly happy with my setup.
"I know you said current but Im going to post my old one as well.
This was my pedalboard from my noise rock band a year and a half ago:
Ernie Ball VP JR, Akai Deep Impact, Sparkle Drive, ProCo Rat II, Marshall Guvnor, Boss GEB7, MXR Phase 90, Boss CEB3, Boss BF2, MXR Dynacomp, Eden Navigator FS, Morley FS (Rackmount Sansamp RBI), Tech 21 MidiMouse (Rackmount Sansamp PSA1)
Its built on a few pieces of plywood made to drop into a Roadready mixer case. All the wirring is run under the plywood through channels I routed. The whole thing is covered in heavy duty green canvas. Im not using the same setup anymore so Im redoing the board, and re-using the case.
And this is where Im at now:
This is what it should look like when done:
EB Volume Pedal JR, Sanford and Sonny Blue beard,MXR Stereo Chorus, Akai Deep Impact, TU2, Voodoo Labs Sparkle Drive, MXR Phase 90, ProCo Rat II, Ebow
The black box in the upper left is going to have jacks installed on top and the side with the pedals permanently plugged in on the side so that I just use the jacks on top to plug my basses and amps in, instead of trying to squeeze my hand around on the board each time I setup and break down. That makes it really convenient considering the fact that I run between 2 and four signals to different amps and inputs.
I was about to click submit when the UPS dude rolled in with this!
Its a Roland PK5A Pedalboard Midi comtroller. Im going to hook it up to a Nord Electro Synth/Organ so I can play deep doomy pedal tones while still rocking a bass line. I havent picked up the Nord yet, but I'll be ordering it as soon as the Nord rep tells me how many rack spaces the unit is. 4 or less and I go rack, more than 4 and Im getting the keyboard."
Do I get some kind of award? Im so incredibly happy with my setup.
You'll win the award when we see you pulling off the fancy pedal doom work whilst rocking the bassline!
Oh, and I saw Coliseum on tour last year with Doomriders.
We share a practice space with Coliseum's drummer who lives down here even though the band is based in Louisville. They are easily one of my two fav bands along with Dove.
My band Coffin Dancer might ask Ryan (the guitarist/singer) to design some T's for us. Im also thinking of asking him to help me draw up my next tat.
Oh, and for what its worth, I dont plan on being too fancy, just loud and low.
My band Coffin Dancer might ask Ryan (the guitarist/singer) to design some T's for us. Im also thinking of asking him to help me draw up my next tat.
Oh, and for what its worth, I dont plan on being too fancy, just loud and low.
- Status
