PYPB 41 - Fred The Goldfish

[tayal01]

Yes, a tuner - hands down my most used pedal, for frequent checks of the tuning (duh ) and for muting between songs and while switching basses.

Of course! Why didn't I think of that? I can fill that gap with a second bass!

 

[mattbass6945]

Tell him to lose a couple cymbals.

ha! this.

 

[HolmeBass]

Added a Ditto. I won't get better with the Ditto unless I practice, and it's going to take a lot of practice for me to get to nailing it on the first or second try starting a loop.

I also redid the power wiring. It's still nowhere as neat a lot of your boards, but it's a huge improvement on mine! The three 18 V effects are not near each other, so that daisy chain is just messy. Been digging this board live when I get to use it, which is only with two bands I play with.

 

[mattbass6945]

as it stands this week (until i change it next week!), added the hardwire pedals and the vt bass. took off the muff and the phaser.

was surprised by how good the hardwire pedals sound.

also, liked the vt better sooner in the chain.

thoughts?

 

[yaksonator]

Here's half of my board. This is the one I can virtually take everywhere. Oh and the bdpg after that swell b-peg is glorious. Props to ry from fuzzrocious for making an all around great versatile pedal!

I will soon (end of the week) get a myco three as well to pair with my b-peg. Cost a lot of money but if you heard that b-peg you'd understand!

 

[Taylor Livingston]

Some great boards in here! Need to check in more often.

 

[St Drogo]

Looking through this thread, I gotta say: I love huge boards. It's like you're mission control for an intergalactic star destroyer, and the bass is just there for style purposes.

 

[BassManPatsFan]

I did a little rearranging tonight:

I've come to realize that I'm just not much of a filter guy, so I might replace the 443 with more dirt, possible a Vintage Microtubes.

 

[Dazonbass]

seems like the past 2 pages have had a bit of "Swell" love

 

[Wud]

Woo Taylor !

Good to see you again.

Do you still have any of those Christine PCB's ?

 

[Taylor Livingston]

Hey Woody, yep, still have them.

 

[HolmeBass]

Hey Taylor, thanks for making great stuff like the Polytope. What a killer sounding pedal. I use just detune, no modulation, and it works great as a chorus, on a mid-forward otherwise clean bass tone it's a great take on a "classic" chorus tone. Then the very same setting after octaver/OD/filter really cops a fat synth tone- very ballsy and the Polytope adds a synth-like punch to the leading edges of the notes.

 

[Taylor Livingston]

Glad you're enjoying it HolmeBass!

 

[jasonmitsch]

Upgraded to a pedaltrain pro. Next step is to buy a soldering iron and make some custom cables to organize everything and make some room for my pitchgrinder that is being repaired.

Signal goes
Bass
wounded paw v4
*1* clean
*2* mxr bass octave deluxe
*3* Pigtronix Mothership>boss oc2>mooer HustleDrive>mooer black secret> mooer triangle buff>wmd Geiger counter> source audio bass envelope filter
*4* line6 m9 with line 6 exp pedal. Right out goes back to the blender, left out goes to a guitar amp.
Polytune mini
Sansamp PBDDI
Amp

 

[jasonmitsch]

Forgot the pic

 

[fivestringgecko]

Forgot the pic

Oooo, you have the Hothand 3 Universal... What are you using it for and how do you like it? Are you using it with the Source BEF? If so, why not just get the regular Hothand?

5sg.

 

[FretNoMore]

... because now there is just no space left and I don't want a larger case.

Multidrive -> Euphoria -> Thumpinator -> Octaver -> Wonderlove -> Compressor ->
Grand Orbiter -> Darkglass Vintage -> Chorus -> Flashback -> Polytune -> ParaEq

The placement of the pedals isn't quite as logical as I'd like, but it was the only way of squeezing
the pedals in, and in a way where I can reach all bypass switches that I may want to step on.

The Thumpinator had to go after the Euphoria to negate the phase inversion it causes.
Apart from that, and the tuner not being last, the order is what I want.

So, no more excuses now, go and practice already.

 

[Jean Baudin]

Nice Tetris Skills!

 

[FretNoMore]

 

[jasonmitsch]

Oooo, you have the Hothand 3 Universal... What are you using it for and how do you like it? Are you using it with the Source BEF? If so, why not just get the regular Hothand?

5sg.

So far I only use it with the BEF, but I've dabbled with the hot hand controlling the m9. I just didn't find any uses for it yet. I like having the option of controlling any expression though and there are a couple of pedals on my gas list that can probably put it to good use.