Rebuilt my gig board around my new Noble DI - liking the current sound quite a bit (was running a Nano with an Ampeg DI, Broughton LPF/HPF and tuner).
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
I'm forgetting, did you order it straight from Daniel? I know around November he changed the LPF range and resonance response. I had the first iteration of the OCSD and can't speak to the newer model. Also, good to know about the VT. I've been wondering whether it can replace the SVT model on my Zoom B3NThat's the same reason I'm replacing the VT bass. Because of the resonance hump. I'm hoping I can deal with that with the tweakability of the omnicabsim. I've actually been just using the record output of the Meatsmoke with decent results to hold me over until it comes in.
I'm forgetting, did you order it straight from Daniel? I know around November he changed the LPF range and resonance response. I had the first iteration of the OCSD and can't speak to the newer model. Also, good to know about the VT. I've been wondering whether it can replace the SVT model on my Zoom B3N
How small can they make a pedal? Those Mooer's and TC electronic's are already small but HoTone can do them with an even smaller footprint.
One more Hotone next to the Ditto, or go for a tiny Albit micropedal or Henretta Engineering or super-micro heel kleine Tone Butcher pedals...How small can they make a pedal? Those Mooer's and TC electronic's are already small but HoTone can do them with an even smaller footprint.
View attachment 2835668
Filled the last empty spot on the board, HoTone Harmonist.
Latest iteration. i found the Mini Mu for dirt cheap used at my local mom and pop music store and it quickly earned a spot on my board. I feel like the Mini Mu is criminally under-hyped!
How the you like the Cloven Hoof on bass?
Did you compare it to the normal Hoof?
Thanks!![]()
I prefer to leave that spot open, gives me some space to control the Ditto foot-switch while playing.

View attachment 2838047 View attachment 2838048 Finally have all the pieces
There will be noise. One of these three will be killing it later. the darkstar parts bass will be taking the lead. The signal chain is Wah->modded CS2->Feed Me->Prometheus->Karaoke Party->Tight Drive->Bass Screamer->MOTH->Blowerbox->Tight Fuzz->TAFM-> Meltdown(way huge pierced moose clone)->lunareclipse->phase 90->bass chorus->modded Tremolo->Waza Vibrato->Modded Fab Echo->Modded DD3->Argo into the DD3(I'll post sound clips)
View attachment 2839792
MOTHERSHIP
Pedaltrain PT-GRANDE
TWA Great Divide 2.0 Analog Synth Octaver
Earthquaker Devices Data Corruptor
Zvex Fat Fuzz Factory
Malekko Omicron Fuzz
Zvex Mastotron
Bananana Effects Matryoshka
Iron Ether FMereon
"Mr Sparkle"Way Huge Pork Loin (cap change:John K mod, rehoused/etched: Acid Splash Designs)
Broughton PLL
Way Huge Swollen Pickle: Dirty Donnie Edition
Death Star Sovtek Muff (bias,gate,feedback mods: Guttermouth Mods: lo/hi mids,Tonebender/Muff footswitch, diodes blend, Q2 resistor, Q3 resistor, LED switch with diodes lift: Acid Splash Designs)
Gnomeratron VTF MK-II
WMD Geiger Counter (bass mod: Danndubblewe)
Chunk Systems Octavius Squeezer
"MST3K" EHX Bass Micro Synth XO
Boss SY-300 Guitar Synthesizer
PandaMidi Future Impact
Mooer Bass Sweeper
Fuzzrocious Terrordactyl V.2 Kid-Paint Edition
3-Leaf Audio Proton MK-II
3-Leaf Audio Groove Regulator MK-I
Dunlop 105Q Mini-Wah
Eventide H9 MAX
Zvex Instant Lo-Fi Junky
Boss PS-3 Digital Pitch Shifter/Delay
Boss VB-2W Vibrato Wazacraft
Subdecay Prometheus
"Hypnotoad"EHX Freeze (rehoused/etched:Acid Splash Designs, mods:blue LED with bezel,click less bypass)
Eventide H9 MAX
Eventide H9 MAX
DOD Meatbox Subsynth MK-II
MXR M87 Bass Compressor
Controllers:
Source Audio Reflex (MIDI:SY-300,Future Impact.Expression: DMC-4v.2,Geiger Counter,FMereon )
Damage Control: DMC-4 gen.2 (3 H9s)
Bentinstruments mini PEEP (PS-3)
Pissing Unicorn (remote switch: Freeze)
Heet Sounds Plus-EBOW
Dunlop Chrome 220 Slide
Dunlop Bronze 222 Slide
Dunlop Glass 213 Slide
D'Addario NS Tri-Action Capo
Power:
Voodoo Labs 4x4 Digital
Walrus Audio Aetos
My crazy huge board for your consideration. Got the FMereon back after a trade-fail but it worked as this second chance has made me really try it and it's truly worth the effort! Also found a cool way to use the Prometheus as an envelope phaser (super chewy). Using a t1m mini expression knob to control the VB-2Ws depth with my foot. Besides that this beast hasn't changed for a while and it's finally settling in. Had a great jam session on Saturday with my rhythm guitarist and it was awesome.
I know you've probably answered this before, but do you have a concrete example of using all three H9s at once? I have two and 90% of the time they are mostly for different preset lists and different chain locations, only MAYBE 10% of the time do I use them simultaneously. Just curious.
I know you've probably answered this before, but do you have a concrete example of using all three H9s at once? I have two and 90% of the time they are mostly for different preset lists and different chain locations, only MAYBE 10% of the time do I use them simultaneously. Just curious.