As usual not as much of a regular pedal board, but more a collection of pedals lined up and linked together by patch cables:
This is my home headphone practising setup, hence the M-Audio Fast Track audio interface last in the chain, which I pretty much use as headphone amp.
However I plan for this to be me my jam setup in the future too for both band rehearsals and eventual live gigs.
The signal chain is as follows:
Harley Benton CPT-20 pedal tuner, which also functions as a mute when switched on. >
Boss LS-2 effect loop line selector, with the tuner pedal going into input and set to the [A+B Mix >> Bypass] setting, with loop A functioning as clean blend set to slightly above 25% and the B loop running on the Behringer GDI21, which I use as dirt unit, at about 50%. >
Behringer GDI21 guitar preamp and dirt pedal, set to the [California], [Clean] and [Off Axis] settings with a good amount of dirt dialed in. (A pretty exact, but cheaper build clone of the Tech 21 GT2). >
Monarch MFL-22 flanger. >
EHX Black Finger tube driven optical compressor, used as tube preamp by almost entirely dialing the compression circuit out of the equation, and set to a mild tube breakup when digging in hard (always on). >
Behringer BEQ700 7 band graphic bass EQ (always on).
Pedals to be added in the near future:
Mooer Tender Octaver MKII octave down/up
EHX Canyon digital delay