I wouldn't be surprised if it's that beast that transports him!
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
PYPB 44: ...like Tetris with boxes, wires and cables
- Thread starter Jean Baudin
- Start date
I wouldn't be surprised if it's that beast that transports him!
What's going in that black hole in the middle?
Magic Pedals HM-2 and Witchfinder. Right now it serves as a nice handle.
GANJA SMUGGLER
PT-Nano
“Lucky 113” (Pearl OC-7 clone)
Zoom MS 100-BT MultiStomp
Tech 21 Sansamp GT-2
“Like a Brick Wall” Boss LM-2B (re-housed,etched, enhance knob taken off)
This mini-board hasn’t changed in a bit and works perfectly.
MOTHERSHIP
Pedaltrain PT-Grande with
Pedaltrain PT-PRO
Iron Ether Subterranea
“Ezekiel” Danndubblewe (DAM 25-17 clone)
Iron Ether FMeron
Broughton
Earthquaker Devices Data Corruptor
Source Audio Multi-Wave Bass Distortion SB2
Boss Hyper Fuzz FZ-2 clone
Arcane Analog Super Fuzz (bigger ca
CoPilot Orbit
Katanasound Super Bass Fuzz
“Ass Ass Ass”Devi Ever Shoehazer Clone (Soda Meiser side has Vintage Fuzz Master switch, Torn Speaker has a bias)
Pixel Shoe clone
Zvex Mastotron
Zvex Fat Fuzz Factory
Farm Pedals Sweet Leaf
Fuzzrocious Rat-Tail (small enclosure, switch: silicon,LED,or
none)
Fuzzrocious Dark Driving
Tech 21 Red Ripper
Crowther Prunes and Custard
WMD Geiger Counter (bass mod: Danndubblewe)
Way Huge Swollen Pickle: Dirty Donnie Edition
Sovtek Death Star Muff (bias,oscillation,gate: Guttermouth. Rehouse/etch,proper jack orientation, lo/hi mids, Q1/Q2 resistor knobs, Tonebender footswitch, bigger caps: Acid Splash Designs).
“Tanooki Homer” Lone Wolf Audio Outer Heaven V.4 Proto
Lone Wolf Audio Left Hand Wrath Deluxe V.3
Boss SYB-3 Bass Synth
"Bass-O Tron"Behringer BSY-600 Bass Synth(rehoused/etched by Dannbubblewe)
“MST3K”EHX Bass Micro Synth XO (etched: Danndubblewe)
Source Audio C4
Subdecay M3 Guitar Synth
Subdecay Octasynth
Subdecay Noisebox
Bananana Matryoshka
Pigtronix Mothership 2 Synthesizer
Boss SY-1 Synthesizer
Chunk Systems Octavius Squeezer
Chunk Systems Agent OO Funk MK-II
PandaMidi Future Impact
EHX Harmonic Octave Generator 2
Digitech XP-1000 (XP-1/2/3/400)
Fuzzrocious Terrordactyl V.2 Kid-Paint Edition
Subdecay Prometheus
Eventide H9 MAX
“Bad Trip” EHX Bad Stone clone:vibe mod
Pal TheGiraffe Flangioplasty
Dunlop CBM105Q Mini Bass Wa
Eventide H9 MAX
Alexander Pedals Radical Delay DX
Boss PS-3 Digital Pitch Shifter/Delay
Hungry Robot Wardenclyff
Fuzzrocious Afterlife V.1
Roland RE-20 Space Echo
Space-Tower:
Boss RPS-10 Digital Pitch Shifter/Delay
Boss RRV-10 Digital Reverb
Boss RCL-10 Compressor/Limiter
Mothership Controller(s):
Source Audio Reflex(Expression: DMC-4, RE-20, Geiger Counter)
Damage Control: DMC4(2 H9s and HOG2)
DMC-micro (C4, Future Compact,)
Hosa Hold-Switch (RPS-10 hold)
Heet Sounds Plus-EBOW
Dunlop Chrome 220 Slide
Dunlop Bronze 222 Slide
Dunlop Glass 213 Slide
D'Addario NS Tri-Action Capo
The Mothership had some pieces re-arranged and added the Pixel.
Attachments
I posted the pictures in my last post (uploaded) but never showed them.
This is my Ibanez SRK-P4 with built in routing for the Korg Kaoss-2 mini-pad. Having this I bought a Korg mini Kaossolattor as both are proprietary.
I made a space to save the second module on the back. I printed out all the effects list for both for quick reference. I also installed a 10000 mAh power bank to power the synth module. 2 AA batteries last about 2 hours, this bank last a LONG time.
I also have a Steinberger Spirit XT-25 5-string headless bass that based on spacing and ergonomics was the perfect candidate for my next modification.
Top View
Gizmotron gears, drive and bridge position
After various analysis on multiple basses and wanting to use one with a small for factor, roundwounds, and overall fit the decision fell on this guy! The fit is perfect for using the device, playing fingerstyle and even using it in tandem. Power bank (8000 mAh) more than meets the needs and better that the 6 foot long power cord that comes with it.
This is my Ibanez SRK-P4 with built in routing for the Korg Kaoss-2 mini-pad. Having this I bought a Korg mini Kaossolattor as both are proprietary.
I made a space to save the second module on the back. I printed out all the effects list for both for quick reference. I also installed a 10000 mAh power bank to power the synth module. 2 AA batteries last about 2 hours, this bank last a LONG time.
I also have a Steinberger Spirit XT-25 5-string headless bass that based on spacing and ergonomics was the perfect candidate for my next modification.
Top View
Gizmotron gears, drive and bridge position
After various analysis on multiple basses and wanting to use one with a small for factor, roundwounds, and overall fit the decision fell on this guy! The fit is perfect for using the device, playing fingerstyle and even using it in tandem. Power bank (8000 mAh) more than meets the needs and better that the 6 foot long power cord that comes with it.
Waiting on the replacement screws for my power supply to come in, but I've tested the Fuzzrocious pedals individually, and I'm a *huge* fan. The only thing I may change up... the Shift Line A+ is a bit redundant right now... but it does a very-close-to-B3K drive, which I like a lot. Just mocked everything up (spacing is slightly off... that'll be fixed when I run cabling... making sure everything fits right now).
Tentative chain is Tuner -> Octave -> Spectrum -> Comp -> A+ -> Fella -> Stache -> Clone -> Phase 95 -> Carbon Copy -> VTBassDI -> HPF
Tentative chain is Tuner -> Octave -> Spectrum -> Comp -> A+ -> Fella -> Stache -> Clone -> Phase 95 -> Carbon Copy -> VTBassDI -> HPF
This is fantastic news. One of my favorite builders, was so bummed when they stopped.
Current board and pedal collection in the music room
Jammed through a weird mismatched rig earlier in the week, and this setup worked great. I'm really liking the gain stacking possibilities of Fella->MBD2. MBD2 by itself fit perfectly into the mix in this instance.
Famous last words... I sortof feel like I'm done, now. The fuzzrocious drives moved to my board this week, and I have to say... the L'il Fella may be one of the most versatile OD's I've ever played in my life.
All of this has been going back n forth on my main board.
At some point, I had both hx stomp on the board and I could have called it a day. Great tones and could easily dial in anything I needed, but where’s the fun in that haha
My main board is the one with the black hx stomp. Ultrawave is doing all the work as eq, comp and distortion and has the best tones of all my different setups.
The board with the white hx stomp, the eq2 and compressor is my sort of preamp. Eq into comp into stomp(distortion from stomp and h9) and back into the 2nd channel of the eq2 and a end of chain eq there.
The clean tones are actually even better in this setup, drives are almost as good as in the ultrawave but just almost.
It still sounds great.
It’s a fun board and I can take either to rehearsals and it will just work.
The last board is with a bit of leftovers, that still sounded really good. If I was to put a compressor in there too, it would be even great.
The only struggle there is that I can’t connect my synth in there, but I might work that out too.
Long rant…but it was just a reflection over how fun it was to play through all of these boards. All with limitations and benefits, and a knowledge of me never being done…
Up and running!
On the right, next to the broadcast, a tuner will take up residence. On the top there's some space for the model t preamp that will hopefully arrive soon or for an ebs octaver or ...
The white plugs on the right are the 24v for the broadcast. maybe i will go back to 18v. Don't know yet. when this is decided, the powercales will be cleaned up. Maybe i will fit a HPF under the board. Let's see.
On the right, next to the broadcast, a tuner will take up residence. On the top there's some space for the model t preamp that will hopefully arrive soon or for an ebs octaver or ...
The white plugs on the right are the 24v for the broadcast. maybe i will go back to 18v. Don't know yet. when this is decided, the powercales will be cleaned up. Maybe i will fit a HPF under the board. Let's see.
