damn DB! and people say my board is anger incarnate!
Lol thanks, I really want to slap a ring mod on there right now but otherwise things are looking swell. I like it angry.
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
PYPB XL: Midlife Crisis
- Thread starter metalinthenight
- Start date
Lol thanks, I really want to slap a ring mod on there right now but otherwise things are looking swell. I like it angry.
This is like a "greatest hits" board for me...I've owned all of these pedals multiple times now, with the exception of the Gain Changer, and once again I'm back to my old favorites. I'm looking to get a better power solution in place now. I'm also hoping the Eventide H9 that emerged at NAMM will be as good as advertised; then I can swap it with the Space and save a little bit of room. Other than that, I'm loving this setup.
I traded down from a Timeline to the El Cap and don't regret it at all. I would also seriously recommend the Barber Gain Changer to bass players everywhere...it sounds fantastic on both guitar and bass, as does the Basic Audio Foxy Lady! Both have tremendous range in saturation and keep the low end very much intact.
Sorry for the poor lighting/picture quality. The signal chain is:
Barber Gain Changer > Basic Audio Foxy Lady > VP Jr. > TU-2 > El Capistan > Space
I traded down from a Timeline to the El Cap and don't regret it at all. I would also seriously recommend the Barber Gain Changer to bass players everywhere...it sounds fantastic on both guitar and bass, as does the Basic Audio Foxy Lady! Both have tremendous range in saturation and keep the low end very much intact.
Sorry for the poor lighting/picture quality. The signal chain is:
Barber Gain Changer > Basic Audio Foxy Lady > VP Jr. > TU-2 > El Capistan > Space
bassgiant15
Endorsing Artist: Spector Basses
- Dec 19, 2005
- 2,074
- 1,459
- Disclosures
- Endorsing Artist: Spector Basses
Heet Sound Plus-EBOW Electronic Bow
(rarely used) Tortex 0.73mm picks
Pedal-board (CACOPHONY):
Madbean Lowrider Pearl OC-7 Octave Clone
Boss OC-2 with synth mod
Way Huge Swollen Pickle Jumbo Fuzz MK-II
"Blueberry Muff-In Sovtek Russian Big Muff (Guttermouth mod:larger caps, bias, gate, true bypass, feedback switch)
"Planeta Fuzz" Wooly Mammoth clone
Fuzzrocious Terrordactyl
WMD Geiger Counter with bass mod
Tech 21 Red Ripper
EHX H.O.G. Harmonic Octave Generator
WMD Super Fatman
Boss PH-2 Super Phaser with LFO disable and Pulse mods
Ibanez SF-10 Swell Flanger
"Wah-Wah Whale" Dunlop 105Q Bass Wah
Roland RE-20 Space Echo
MSLP custom lo-fi delay/cave reverb/lo-fi looper with tap-tempo, extended delay, LED for repeats, subdivisions, feedback take-off switch mods,modulation speed mod, save switch for loop, detune switch (hold if for about 20 seconds and it literally stops from how slow it goes) for loop.
Boss RV-3 Digital Reverb/Delay
TC Electronic Polytune Mini
Boss LMB-3 Bass Limiter
MSLP custom noise suppressor
So some changes on my board since the last post: got rid of the BSY-600 (not stable and would rather add to my octave/fuzz/filter arsenal so I got a Madbean Lowrider (Pearl Octaver Clone).
It's amazing and the 8va is analog fuzz goodness....
Also the custom MSLP looper is AWESOME! It has a 1980's answering machine chip and with its filter control can get very lo-fi...
How are you powering that monstrosity?
It has similar qualities but its really its own thing. It can't get as intensely modulated as the ZVEX but is more straightforward. It has 4 knobs: master volume, dry, playback and a filter (using this it can get very dirty to tape-like playback. The momentary detune switch is where the madness lies as it sounds EXACTLY using your finger on tape to slow it down. I'm planning on doing a video review soon time permitting.
The EHX H.O.G. has its own wall wart, the Roland RE-20 has its own (MUCH noisier when chained).
Every thing else is all a 1-spot (and I have no noise issues: practice, gigs or even recording direct like we did yesterday...
Just revamped the new board and just wanted to see what y'all thought. Here's the signal chain:
J bass --> Korg Pitch Black ---> sfx Thumpinator --> Diamond Bass Comp --> T1M Blender --> JHS Low Drive (in effects loop of blender) --> Retrospec Juicebox
It's all powered by a voodoo labs pp2+ and on a pedaltrain junior.
The extra room up top is going to be eventually filled with some more dirt. Possibly a Big Muff Pi or something.
- Mike
J bass --> Korg Pitch Black ---> sfx Thumpinator --> Diamond Bass Comp --> T1M Blender --> JHS Low Drive (in effects loop of blender) --> Retrospec Juicebox
It's all powered by a voodoo labs pp2+ and on a pedaltrain junior.
The extra room up top is going to be eventually filled with some more dirt. Possibly a Big Muff Pi or something.
- Mike
Attachments
So some changes on my board since the last post: got rid of the BSY-600 (not stable and would rather add to my octave/fuzz/filter arsenal so I got a Madbean Lowrider (Pearl Octaver Clone).
Heet Sound Plus-EBOW Electronic Bow
(rarely used) Tortex 0.73mm picks
Pedal-board (CACOPHONY):
Madbean Lowrider Pearl OC-7 Octave Clone (NOT HERE BUT SOON!)
Boss OC-2 with synth mod
Way Huge Swollen Pickle Jumbo Fuzz MK-II
"Blueberry Muff-In Sovtek Russian Big Muff (Guttermouth mod:larger caps, bias, gate, true bypass, feedback switch)
"Planeta Fuzz" Wooly Mammoth clone
Fuzzrocious Terrordactyl
WMD Geiger Counter with bass mod
Tech 21 Red Ripper
EHX H.O.G. Harmonic Octave Generator
WMD Super Fatman
Ibanez SF-10 Swell Flanger
Boss PH-2 Super Phaser with LFO disable and Pulse mods
"Wah-Wah Whale" Dunlop 105Q Bass Wah
MSLP custom noise suppressor
Roland RE-20 Space Echo
MSLP custom lo-fi delay/cave reverb/lo-fi looper with tap-tempo, extended delay, LED for repeats, subdivisions, feedback take-off switch mods, save switch for loop, mod switch for loop.
Boss RV-3 Digital Reverb/Delay
Boss LMB-3 Bass Limiter
TC Electronic Polytune Mini
Controllers:
Boss FV-500H (expression for H.O.G.)
re-housed H.O.G. foot controller by DannDubblewe
(EDIT from last night after jam session this morning: had to move the looper to make it more accessible so on its side t goes. Board flows better now so win-win!)
It's amazing and the 8va is analog fuzz goodness....
Also the custom MSLP looper is AWESOME! It has a 1980's answering machine chip and with its filter control can get very lo-fi...
Heet Sound Plus-EBOW Electronic Bow
(rarely used) Tortex 0.73mm picks
Pedal-board (CACOPHONY):
Madbean Lowrider Pearl OC-7 Octave Clone (NOT HERE BUT SOON!)
Boss OC-2 with synth mod
Way Huge Swollen Pickle Jumbo Fuzz MK-II
"Blueberry Muff-In Sovtek Russian Big Muff (Guttermouth mod:larger caps, bias, gate, true bypass, feedback switch)
"Planeta Fuzz" Wooly Mammoth clone
Fuzzrocious Terrordactyl
WMD Geiger Counter with bass mod
Tech 21 Red Ripper
EHX H.O.G. Harmonic Octave Generator
WMD Super Fatman
Ibanez SF-10 Swell Flanger
Boss PH-2 Super Phaser with LFO disable and Pulse mods
"Wah-Wah Whale" Dunlop 105Q Bass Wah
MSLP custom noise suppressor
Roland RE-20 Space Echo
MSLP custom lo-fi delay/cave reverb/lo-fi looper with tap-tempo, extended delay, LED for repeats, subdivisions, feedback take-off switch mods, save switch for loop, mod switch for loop.
Boss RV-3 Digital Reverb/Delay
Boss LMB-3 Bass Limiter
TC Electronic Polytune Mini
Controllers:
Boss FV-500H (expression for H.O.G.)
re-housed H.O.G. foot controller by DannDubblewe
(EDIT from last night after jam session this morning: had to move the looper to make it more accessible so on its side t goes. Board flows better now so win-win!)
It's amazing and the 8va is analog fuzz goodness....
Also the custom MSLP looper is AWESOME! It has a 1980's answering machine chip and with its filter control can get very lo-fi...
Sillyfabe I have always dug the case you use, long so that your feet don't need to travel as far. Of course the effects are great as well, but, I am curious though about the Boss RV-3. I had an RV-5 and got rid of it because it had a noticable volume jump when switched on, does the RV-3 do the same?
As you can see, this thread was the kick in the pants I needed to get serious about my board. Since I last posted a photo:
- Swapped out Boss FV-500L for Mission Engineering EP-1
- Upgraded Source Audio BEF to BEF Pro
- Added a Mission Expressionator to control Space and BEF Pro
- Moved a bunch of stuff around so it'd all fit
- Cleaned up all the wiring
Now what?
I am not a good artist.
P.S. Can someone please explain to my why my photo keeps getting rotated?
P.S. Can someone please explain to my why my photo keeps getting rotated?
In regards to the case: I have size 14 feet and I've never had an issue, even with wild EBOW/fuzz/pitch-shifting/space echo rockouts!
In regards to the RV-3: I've used a RV-5 and did notice a volume jump as well. It sounds like its unity to me when engaged and the 100% wet sounds unity as well.
Well worth finding one!
In regards to the case: I have size 14 feet and I've never had an issue, even with wild EBOW/fuzz/pitch-shifting/space echo rockouts!
In regards to the RV-3: I've used a RV-5 and did notice a volume jump as well. It sounds like its unity to me when engaged and the 100% wet sounds unity as well.
Well worth finding one!
Good to know, because I like that it is reverb and delay in one pedal. Thanks
I am not a good artist.
P.S. Can someone please explain to my why my photo keeps getting rotated?
Nice board!
@ image rotation...
If you're uploading your photos directly from your camera that may be it. Some cameras don't record orientation. Opening and then saving them in Photoshop or whatever may solve the issue. Just a guess... Otherwise, no clue.
