• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Show Us Your Rob Allen Basses Part IV

RAs can be a bit tricky to amplify as they have a lot of lows and also have piezo "clack".
+1...I consistently keep the (on-board) bass cut on my (e~c) D5.

My fav amplification setup to date, is the Berg B|Amp+HG410 (includes a rear facing 10, for 3D sound effect)... The B|Amp has now firmware-morphed to include a really good vlpf, OD, comp, in addition to the vhpf and notch filter. I supplement with only a small Nano board (wireless, chorus, delay, and reverb)...
684EB682-521E-4FC2-A672-CA6686F7878A.jpeg
 
Last edited:
I was in the studio today and believe it or not, this was the first chance I had to record the (second) Deep 4 I got from Rob. It sounded great. Amazingly enough I took my '63 B-15N out of mothballs and schlepped it into the studio. I was wrong. The D4 sounds great through it once I dialed it in (mainly lower gain on the piezo and less than 50% volume on the amp). It's not a rig I'll gig often, but happy the combo worked. I used the mag side of the D4 for one tune and it also sounded killer through the B-15N. It's hotter than both of my '78 Ps, though.
 
  • Like
Reactions: Christian Houmann