Source Audio Sorcerers Society (S.A.S.S) Part 3

[BigBeatNut]

Tell you what would be awesome: If it also had a dry/wet mix on the 'on' side, and the dry/wet mix was stored as part of the scene. That would go a LONG way to giving flexibility to non-SA pedals in setup with an SA hub. For an octave for instance I could store instead of just octave pedal on/off, I could also store 'dry with a bit of -1 for depth', '50/50 dry/wet' AND '-1 only, no dry'.

Hmmm ?

In fact, that might have the potential to draw a lot more people into the SA product line. Could be a game-changer. Where do I claim my commission ?

 

[Adamixoye]

Roger,

Was there any progress/update on the possibility on being able to interchange the guitar and bass OFD firmware through the Hub?

 

[Adamixoye]

^ I realize that may not have been a priority of yours, but it was mentioned at some point and I was under the impression it was at least being considered.

 

[jez79]

Sign me up , I'm using a Manta, a Dimension Reverb and a Hot Hand3

 

[LeonD]

With the Manta, is there any way to determine how the presets are set?

I know with the other pedals you turn the knobs ccw, engage the preset and turn each knob cw until the light flashes quickly. This doesn't seem to work with the Manta.

 

[LSMFT6]

With the Manta, is there any way to determine how the presets are set?

I know with the other pedals you turn the knobs ccw, engage the preset and turn each knob cw until the light flashes quickly. This doesn't seem to work with the Manta.

It's in the manual, trust me.

 

[Mastodude]

Oh, yeah, I just popped my SA cherry and bought an OFD. Sign me up?

 

[adamaarts]

Does anyone else notice any difference between the 2 bypass modes? I was hoping switching to buffered it would remove some of the 'pop' when engaging/disengaging the effect, but it seems the same either way.​

 

[LeonD]

I do notice the buffered pops less when turning on (especially the first time or two). But it still does make some noise.

 

[adamaarts]

I do notice the buffered pops less when turning on (especially the first time or two). But it still does make some noise.

I'll have to try it again. It's pretty significant when I go from a patch with everything off to one that engages both both the OFD and Manta.

 

[Adamixoye]

I'll have to try it again. It's pretty significant when I go from a patch with everything off to one that engages both both the OFD and Manta.

So you're doing this with the Hub and both of them in buffered bypass?

 

[adamaarts]

So you're doing this with the Hub and both of them in buffered bypass?

Yes on the Hub. I've tried buffered bypass but didn't notice any difference in the popping, so switched back to true bypass. I'll give it another go, was hoping maybe I just did something wrong and I should be able to eliminate those pops!

 

[rsmith601]

I am out of the office until Monday. Will get back to you all on these items when back. For anything urgent, please send email to [email protected].

 

[LeonD]

It's in the manual, trust me.

Found it. Thx.

 

[rickenbaker]

Hey guys I'm having a bit of an issue with my new Dimension reverb. I just got it today plugged it in and I got no sound. At all. I was using the included the power supply and everything. No sound in either bypass mode or with the effect on. The only sound I get when I turn the pedal on is a loud pop. I tried all the cables out by themselves and they work just fine. I tired the dimension with another power supply and still a no go. I used my ofd and everything is fine. Any potential trouble shooting help or did I get a dud?

 

[adamaarts]

Sounds like a dud, hit up [email protected]

 

[adamaarts]

Having too much fun with my new controller and Hub:

 

[Bellbass]

Hey guys I'm having a bit of an issue with my new Dimension reverb. I just got it today plugged it in and I got no sound. At all.

Did you try changing the cables cause I know there was an issue with some cables I tried that would not work ...

 

[DagoMaino]

Just a reminder:SA has some of the best customer service out there. I won't get into details, but they're just head of the class!

 

[Adamixoye]

Hey guys I'm having a bit of an issue with my new Dimension reverb. I just got it today plugged it in and I got no sound. At all. I was using the included the power supply and everything. No sound in either bypass mode or with the effect on. The only sound I get when I turn the pedal on is a loud pop. I tried all the cables out by themselves and they work just fine. I tired the dimension with another power supply and still a no go. I used my ofd and everything is fine. Any potential trouble shooting help or did I get a dud?

Having too much fun with my new controller and Hub:

So, to be clear, are your M5 presets each associated with a preset patch on the Source Audio pedals and you're sending the same signal? That is, the MIDI commands from the RP-1 change the Source Audio stuff and M5 simultaneously, and then you've had to create multiple M5 octaver presets to match up with your Source Audio presets?