• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Source Audio Sorcerers Society (S.A.S.S) Part 3

I did end up buying the adapter from DMC. I felt dumb doing it but I tried several smaller cables with right angle ends that I hoped would work but mixed results. The cable in the pic worked some of the time but also cut out sometimes so I'd have to adjust it. I would not recommend. But I have had no issues since getting the one from DMC. Sorry.
I definitely find the quality of cheap (and sometimes even pricier) USB cables to be all over the place. I broke one of the ends of my DMC Ghost cable, and also found the right-angle cables to be prone to issues with tension and unseating with my DMC-8. I ended up getting a set of up/down-angle cables (the USB jacks of the DMC and C4 are upside down from each-other) that helped minimize any pressure or tension on the ends when routing the cable under the board on a Pedaltrain, and I used that set without issues until I ditched my DMC.
 
After shelving my SA gear for a while I’m picking it back up. I picked up a C4 and now I’m up to 6 SA pedals. I also only have four cables for my neuro hub. What are
My options to handle the 6th pedal? What’s a good source for my missing cable for at least my 5th pedal?

I hooked the hub up to my PC and was able to connect to the 4 pedals but I was getting some nasty glitchy sound through my amp when the hub is connected via USB. Noise is there even when the pedal board is muted. Disconnect the hub from USB, noise is gone and everything sounds fine. Any thoughts on what this could be? Granted, it is a super cheap and old USB cable but I wouldn’t think that would cause issue since it isn’t inline with audio signal.

here’s my setup

B0854F7B-7A43-4E72-8DA8-ED5F62CBA899.jpeg
 
After shelving my SA gear for a while I’m picking it back up. I picked up a C4 and now I’m up to 6 SA pedals. I also only have four cables for my neuro hub. What are
My options to handle the 6th pedal? What’s a good source for my missing cable for at least my 5th pedal?

I hooked the hub up to my PC and was able to connect to the 4 pedals but I was getting some nasty glitchy sound through my amp when the hub is connected via USB. Noise is there even when the pedal board is muted. Disconnect the hub from USB, noise is gone and everything sounds fine. Any thoughts on what this could be? Granted, it is a super cheap and old USB cable but I wouldn’t think that would cause issue since it isn’t inline with audio signal.

here’s my setup

View attachment 4484302
Ground loop caused by connecting to your computer, you’ll need to use a usb isolator or a ground lift to eliminate the noise, or plug everything into a common power location.
 
  • Like
Reactions: Sean Baumann
After shelving my SA gear for a while I’m picking it back up. I picked up a C4 and now I’m up to 6 SA pedals. I also only have four cables for my neuro hub. What are
My options to handle the 6th pedal? What’s a good source for my missing cable for at least my 5th pedal?

I hooked the hub up to my PC and was able to connect to the 4 pedals but I was getting some nasty glitchy sound through my amp when the hub is connected via USB. Noise is there even when the pedal board is muted. Disconnect the hub from USB, noise is gone and everything sounds fine. Any thoughts on what this could be? Granted, it is a super cheap and old USB cable but I wouldn’t think that would cause issue since it isn’t inline with audio signal.

here’s my setup

View attachment 4484302
Send your address in a PM and we will send you a 5th cable. :)
2 Hubs works fine. Many have done this.
 
Ultrawave question: TL;DR What would your most commonly used sounds with this pedal for eclectic bass-in-your-face rock music?

My new group (guitar, bass, drums, vocals) so far has parts that range from sounding like Helmet, Primus, Sufjan Stevens, Tom Waits, and I dont know what else…All three of us have extremely wide ranging musical tastes. E.g. members have formerly been in accordion or banjo horror folk bands, ska, metal, americana, bluegrass, orchestra, jazz….And Ive returned to bass after a long hiatus on various other instruments. Last time I mained bass, there weren't many effects options tailored to it.

So this pedal similarly has so many options I am not sure where to start. We have been writing/arranging things so far with pretty prominent bass parts, which works well for the guitar player who enjoys and excels at leadish and very heavy sometimes atmospheric pedal effected parts. So I have thus far been pretty happy to just have a good overdrive and distortion that keep the lows intact, so he can not worry about keeping up a chord/riff foundation.

I feel like it would be good to come up with some other starter presets for the other 4 slots that I can more easily use on the fly as we write together. But not sure which to prioritize…I have a nice folded one, octave, but those seem like Id use less often.

Anyway, would just love to hear your subjective ideas.
 
Ultrawave question: TL;DR What would your most commonly used sounds with this pedal for eclectic bass-in-your-face rock music?

My new group (guitar, bass, drums, vocals) so far has parts that range from sounding like Helmet, Primus, Sufjan Stevens, Tom Waits, and I dont know what else…All three of us have extremely wide ranging musical tastes. E.g. members have formerly been in accordion or banjo horror folk bands, ska, metal, americana, bluegrass, orchestra, jazz….And Ive returned to bass after a long hiatus on various other instruments. Last time I mained bass, there weren't many effects options tailored to it.

So this pedal similarly has so many options I am not sure where to start. We have been writing/arranging things so far with pretty prominent bass parts, which works well for the guitar player who enjoys and excels at leadish and very heavy sometimes atmospheric pedal effected parts. So I have thus far been pretty happy to just have a good overdrive and distortion that keep the lows intact, so he can not worry about keeping up a chord/riff foundation.

I feel like it would be good to come up with some other starter presets for the other 4 slots that I can more easily use on the fly as we write together. But not sure which to prioritize…I have a nice folded one, octave, but those seem like Id use less often.

Anyway, would just love to hear your subjective ideas.
I mostly use the Ultrawave for fuzz, and currently I'm only really using a single preset, which GMC announced here (with instructions).
 
  • Like
Reactions: GMC and rsmith601
My guess was Reflex 2, partly due to the “Duran x2”, which indicates Duran Duran and a mark II. From the board it has MIDI I/O, 4 encoders and a screen (according to an electrical engineer friend of mine).
My guess too. It could be a Neuro Hub II / Reflex II / Hot Hand midi controller....One that takes a single expression and outputs over sperate midi channels....who knows...just waiting in anticipation!
 
My guess too. It could be a Neuro Hub II / Reflex II / Hot Hand midi controller....One that takes a single expression and outputs over sperate midi channels....who knows...just waiting in anticipation!
My friend also said it looks like it can control 12 external signals. This made me think of an update to Soleman/Hub.
 
  • Like
Reactions: GMC

Latest posts