• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

SVT KILLER!

No. It's not a bad thing. It's GOOD thing to be able to hear your amp anywhere on stage (and by anywhere, I do mean all way to each side of the stage), and NOT have it decapitating the people sitting (or standing) directly in front of it. And trust me, when I was directly in front of it, there was PLENTY of forward projection.

Here are acouple of pictures to give you an idea of the stage size and layout:

SweRck2.gif


SweRck1.gif


Cheers!
:bassist::bassist::bassist:

Cool....but I have a question concerning stage aesthetics...why the heck is your rig so damn far off center - or is it just perspective from the camera?

Oh - and don't run with that bass in your hands....if you fall you'll put your eye out......:eyebrow:

Cheers!! :D
 
Cool....but I have a question concerning stage aesthetics...why the heck is your rig so damn far off center - or is it just perspective from the camera?

Oh - and don't run with that bass in your hands....if you fall you'll put your eye out......:eyebrow:

Cheers!! :D

When the crew set the amp up, I was thinking about how I hear things on stage using an SVT rig. With an SVT rig, I need it placed behind where my vocal mic is, so I can hear it properly. That's why the stack is there. Next time I get a VBA rig, I'll know that I can hear it wherever it's placed, and have it set up accordingly.

Cheers!
:bassist::bassist::bassist:
 
When the crew set the amp up, I was thinking about how I hear things on stage using an SVT rig. With an SVT rig, I need it placed behind where my vocal mic is, so I can hear it properly. That's why the stack is there. Next time I get a VBA rig, I'll know that I can hear it wherever it's placed, and have it set up accordingly.

Cheers!
:bassist::bassist::bassist:

Oh, okay! just seemed to be Waaayyy off-centered. Not that there's anything wrong with that, I was just thinking that I nearly always have my rig set up nearer the drum riser and my vocal mic is a tad more "off-center". Thanks!!
 
Not meaning to hijack the thread but I bought a VBA 400 and am a little disappointing in it's volume. Our bigger clubs I run the gain and volume at noon and it's certainly not overbearing loud. I think my mesa 400+ is louder yea I know double the power for 3db increase

What cab(s) are you running it into? When I ran one of my VBA400s into an Ampeg 410HLF at a small club gig a few weeks ago, I had to crank the Master Volume to 7 and the Gain to around 5. Into the 2 VBC cabs at Sweden Rock, on a much larger, open air stage, I had the MV at about 5 and the Gain at 2. Through my own early 80s Marshall bass cabs (4x12 top, 2x15 bottom), I keep the MV and Gain around 2, and that is barely low enough to play a decent sized club without blowing everyone's head off, hehehe... :D

Cheers!
:bassist::bassist::bassist:
 
I played it through my 4x10 mesa deisel although it is an 8 ohm cab. I really would like a cabinet to bring this thing to life !

I wouldn't use that cab with a VBA400. The VBA only does 4 or 2 ohms, and an impedance mismatch is really bad for a tube amp. Once you plug it into an appropriate cab, I think you'll be quite happy with the volume and tone. :D

Cheers!
:bassist::bassist::bassist:
 
I was after a VBA a couple years ago but they are soooo expensive new and used ones are almost non existant. SVT, VBA, AD200B......in my dream amp room.
Killer Moser bass brother!

+1 and I'll take my Bassman 300 Pro in place of the Orange. :D

Seriously, I've been watching out for a VBA stateside for a price affordable to a 23 year old kid and it's just not going to happen. I can always wish though!
 
I know your not supposed to but before I did I checked with my amp tech. He said obviously it's not optimum but it won't hurt the amp. Cab suggestions ?

In general terms, more speakers = more volume
Do you like the tone of sealed or vented cabinets?
How big a room do you want to carry and how much to spend?
 
I know your not supposed to but before I did I checked with my amp tech. He said obviously it's not optimum but it won't hurt the amp. Cab suggestions ?

There are a lot of fried output transformers out there that would disagree with your tech. Just saying be careful.

For sure, you're not getting the max power the head can deliver with that mismatch.

Cheers!
:bassist::bassist::bassist:
 
+1

Ampeg may be the standard but then again most people don't think of the ultra-present sound of a Marshall when they think of bass.

Geeze, standard for what? Back in the 70s you saw way more Marshall, Acoustic, and Sunn bass amps. Even Hi-Watt. I don't get the whole SVT thing. I disliked them then, I dislike the new ones even more. :spit:

Marshall bass amps kicked butt!
 

Latest posts