TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
You seem more at ease with the Sterling bass. The articulation and phrasing is better in the pocket than with the Jazz bass.
Make sure you contact Jason at bassstringsonline.com so you get the correct strings for it.Part of it is due to the lower tension on the Jazz Bass, which in turn is due to the shorter neck. I'm considering switching back to flats on it so that I can have a little more tension.
Updated Member List: Updated 5/26/14
theduke1 #2
Phalex #3
crusher47 #4
car_man65 #5
heynorm #6
rodl2005 #7
fjadams #8
iiipopes #9
GIBrat51 #10
Bodeeni #11
RobbBass #12
pnchad #13
BigBeatNut #14
ognihs #15
Technotitclan #16
mrnylon #17
GBassNorth #18
bswag #19
porterbass #20
MasterMonkeyMan #21
SR505bassman #22
Major Softie #23
MTFD24 #24 (By Request)
Staccato #25
vmabus #26
12many #27
CJAtheBassman #28
Sorry, I have to have lists or I mess things up.![]()
That could be a problem. Do you think there is a significant sound difference from the high-gauge Labellas and the low-gauge ones?I think that could cause the nylon to unwrap from the string.
NO!!! That will damage the string, compromise its integrity over the nut, and all but assure the strings will break. If you're not comfortable doing it, have your luthier adjust the nut slots to accommodate the tape wounds. He will make them wider, not deeper, while keeping the proper "witness point" and back relief so the string will intonate properly. A slightly smaller string will always work in a larger slot if there is enough down force back from the nut to the tuner, if you decide to go back to conventional strings.Do you think you can fit a heavier gauge tapewound string without adjusting your nut if you file the nylon off of the string where it sits on the nut?