And a hood scoop. And side pipes. Gotta have side pipes
Needs an AI voice assistant. And GPS. For some reason.
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Needs an AI voice assistant. And GPS. For some reason.
Racing stripes might be tricky on the touch screen but I think we are on the right track here.And a hood scoop. And side pipes. Gotta have side pipes
You're welcome!Let me know if you need any more help with your impending existential crisis
![]()
Or the amp would be free but to use it would cost $99/month subscription...The amp would cost $4k and then you would have to buy a $99/year subscription to access the effects and cab/sim profiles. Meanwhile, firmware updates make the amp slower and slower until you have to buy the v2 updated amp 3 years later.
The amp would cost $4k and then you would have to buy a $99/year subscription to access the effects and cab/sim profiles. Meanwhile, firmware updates make the amp slower and slower until you have to buy the v2 updated amp 3 years later.
Or the amp would be free but to use it would cost $99/month subscription...
You're almost there - all that is left is to link the control panel viz Bluetooth to an iPad. You MAY even be able to put the preamp on an iPad, then send the signal to the power amp by bluetooth. Like with wireless PA speakers..Here it is - the amp of the future!
(Apologies for my poor photoshop skills)
View attachment 5439836
A digital modeling / multi-effect processor with touch screen interface and fully integrated preamp / DI / 800W power amp - all in the palm of your hand!
Basically a Kemper, Fractal, etc. with a cell phone screen attached to a very compact amp head. It'll have everything you ever wanted:
3,500 effects (up to 128 simultaneously)
Store unlimited user patches
Cab sims and IR
Bluetooth / Wi-Fi / USB connectivity
Every type of input / output connection
2 hour looper
USB audio interface
MIDI I/O / Thru
Stereo FX loop
etc.....
A optional footswitch is available.
MSRP: $599.99
How is this miracle of technology even possible??? I don't know, go ask agedhorse.
I think this is where we're headed. Agree or disagree? Will you embrace this future or stick with your traditional gear?
Credit to Headrush Core screen that I totally used without permission![]()
If you don't mind the delay.You're almost there - all that is left is to link the control panel viz Bluetooth to an iPad. You MAY even be able to put the preamp on an iPad, then send the signal to the power amp by bluetooth. Like with wireless PA speakers..
Or the amp would be free but to use it would cost $99/month subscription...
Here it is - the amp of the future!
![]()
Or the amp would be free but to use it would cost $99/month subscription...
There will be a special slot on the top where the drummer can accidently spill his / her drink.
So it’ll have 1,536db of headroom above the noise floor and be capable of reproducing frequencies up to 105khz and make use of the world’s shallowest anti-aliasing filter. Rather than 256 bits of fixed point bit depth I’m surprised the designer didn’t opt to use floating point math, enable scaling and get to even higher resolution with tech available in 2024… but I digressHowever, this amp will have 256 bit AD/DA conversion at 210 kHz with a dedicated modeling processor.

Actually, something like this concept is sort of my dream rig, just not set up quite like that, all in one unit with a phone sized screen.
I watched a rig run down on YT a while back for a major band that I don't recall right now, and they used AxeFX with all the patches for tracks and even subsections of tracks set up, then called via MIDI and it made a lot of sense to me. Though not needed for a cover band typically, I could see it being a great way to dial in specific complex setting with a 1 button push. Add a large capable FRFR speaker and a power amp and that's what I'd like, providing the MIDI controller was large and easy to use and program with say a screen simply to display some data like the preset name, and a scroll/push button wheel to select the preset.
Im all for it.
Seems like most people here are more opposed to the form factor than the actual technology.
Here it is - the amp of the future!
(Apologies for my poor photoshop skills)
View attachment 5439836
It'll have everything you ever wanted
…..no it doesnt
I think this is where we're headed. Agree or disagree? Will you embrace this future or stick with your traditional gear?
…..like a cellphone, maybe, if I have to but hopefully I wont, not because I hate on tech but because I hate the modern idea that all tech (and more) is always better. Options are great sometimes, so is simplicity sometimes.