• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

The official "Show your basses" thread part 19!

View attachment 2872068 View attachment 2872069 View attachment 2872071 View attachment 2872072 View attachment 2872075
1973 Fender Jazz Bass Body, I did an Upgrade to' ..Badass II Bridge, Modulus Controls, S/D Hot'Stacks, Ultra Lite Reverse Tuners, Jazz Bass Neck is a, USA' B Hefner* Flame Maple, Ebony Board, Hand shaped Bone Nut 'Lacquer Finish' I was going to Paint but, I just put it together for now, I may paint it this Spring, I posted this Before but have did several changes Sure I have it the way I need it Really Great Playing and Sounding Jazz, Next Will Be Custom Paint"
Looks done to me.
 
My brother knows I've been looking for a Peavey Palaedium for some time, what I didn't know is that he had bought one from an American Reverb or Ebay listing without me knowing, so I was totally shocked when he turned up with one at my house this afternoon! It's got an amazing sound. I now set my sights on getting an American made Dean Jeff Berlin model.

tliM6rs.jpg


9VCtuiy.jpg

And whilst I'm posting pictures, my daughter really loves my Pentabuzz!

aEyA7xs.jpg
 
Ok, #15 and I'm about ready to acknowledge I may have a problem...but not quite yet! This is the first, unbox, take the foam wrap off, peel the plastic pickup protectors off, NEW bass I've purchased since the very first bass I bought from the Sears catalog back in 1986. Introducing my Ibanez AGBV205A Vintage Artcore semi hollow-body bass. I got a heckuva deal on it because it had a small scratch on it. ;)

View attachment 2872061

View attachment 2872062

View attachment 2872063

Having fun with it right now. B is pretty good and sounds really nice on the bridge pickup with a little chorus.
That distressed finish looks cool. And the scratch that got you a discount probably just adds to it!
 
  • Like
Reactions: EdBo and Jamvan
My brother knows I've been looking for a Peavey Palaedium for some time, what I didn't know is that he had bought one from an American Reverb or Ebay listing without me knowing, so I was totally shocked when he turned up with one at my house this afternoon! It's got an amazing sound. I now set my sights on getting an American made Dean Jeff Berlin model.

View attachment 2872171

9VCtuiy.jpg

And whilst I'm posting pictures, my daughter really loves my Pentabuzz!

View attachment 2872172
Your brother is a gem! I’ve always wanted to test a Palaedium. Let us know what you think of the bass as you get accustomed to it.
 
  • Like
Reactions: BassmanM and EdBo
My brother knows I've been looking for a Peavey Palaedium for some time, what I didn't know is that he had bought one from an American Reverb or Ebay listing without me knowing, so I was totally shocked when he turned up with one at my house this afternoon! It's got an amazing sound. I now set my sights on getting an American made Dean Jeff Berlin model.

View attachment 2872171

9VCtuiy.jpg

And whilst I'm posting pictures, my daughter really loves my Pentabuzz!

View attachment 2872172
Very nice!

Concerning the Dean Jeff Berlin Signature Model:

Get the Czech Made Dean Jeff Berlin Signature Model with the offset machines. Do not get any other. There's a Korean version and a Chinese version. The Korean versions are decent, but lack the BAD ASS II Bridge and the Bartolini pups and the Schaller tuners.

The Chinese version is active but also lacks the BA II bridge, Schaller Tuners and Bart Pups....and Jeff Berlin would never endorse an active bass. These are on Amazon once in a while.

There is currently a Dean Patchwork version on GC used gear section for a very salty price, but it is the real deal.

[Invalid or Expired Link Removed]

Many sellers are pricing the lower quality non-Czech made Dean's at the same price and you'll be stuck with something inferior. Here is a pic of my Dean Czech made Jeff Berlin signature model. For a bolt on neck it has amazing sustain. There are later Czech made versions with tuning machines in line and parallel rather than offset.

Of course if you're talking about obtaining the Dean USA custom shop model that I think was made for 2013 (attached link) best of luck finding one. I've never actually seen the versions made in the Dean USA Florida shop.

Invalid Link Removed

Just be careful before buying. Jeff Berlin left Dean for a reason and although I can't speak for him I very much believe it is because they started making these out of lower quality materials in order to get a higher profit margin, though that is just my opinion. However, Dean seems to do that quite a bit on some of their nicer offerings over time. An example is changing Bart pups or EMG pups to their own versions, changing out BA II bridges to similar looking no name bridges, changing out machine tuners to no name Schaller looking or Grover looking versions, heavier use of basswood which granted, it is a lighter wood, but doesn't resonate well for a bass. It is less of a concern when basswood is used on either side of a neck through style bass.

s-l1600 a.jpg
s-l1600 h.jpg
 
Last edited:
Looks done to me.

I wholeheartedly concur. You can't beat the finish Nature gave it.
I would spend (significantly) more money, taking it back to original
or as close as possible. Neck pocket would prob give indication of
any original finish. But then that's just me and what I think
gives it more collectable value and aesthetic beauty. Hence
(.gif disclaimer). Either way, nice bass.

The Fender Jazz Bass Club Part Seven!!!

Edit. Oh and the rug below the cases, "really ties the room together".
 

Attachments

  • Your Opinion, man.gif
    Your Opinion, man.gif
    631.6 KB · Views: 56
Last edited:
  • Like
Reactions: sneha1965 and EdBo
@B-Mac
Thanks for sharing! What a great looking bass!
I hadn't seen that Patchwork at Guitar Centre. It's pricey but I'd happily spend $1000 on the right instrument. The maple fretboard on that one puts me off, it looks good but I must have an ebony board model for my collection.
I had sent to message to Talkbass user @dharmashawn about a Patchwork he sold a few yeads ago which was apparently a prototype model that Jeff had previously owned but I never heard back.

I keep my eyes on the market, as something will come along eventually!
 
DSCF4277.JPG

My main gigging bass built in 1985. Curly maple neck through with black walnut body wings. Ebony fingerboard, headstock overlay and stripes in the body. Badass bridge, Grover tuners and Alembic pickups & preamp. I still have this and built several versions after with the most recent being a five string I posted in the luthier section. Later this year I will be working on a six string.
 
@B-Mac
Thanks for sharing! What a great looking bass!
I hadn't seen that Patchwork at Guitar Centre. It's pricey but I'd happily spend $1000 on the right instrument. The maple fretboard on that one puts me off, it looks good but I must have an ebony board model for my collection.
I had sent to message to Talkbass user @dharmashawn about a Patchwork he sold a few yeads ago which was apparently a prototype model that Jeff had previously owned but I never heard back.

I keep my eyes on the market, as something will come along eventually!

Sorry about that, I'm kinda here and there with TB. Hit me back up and I'm gonna shoot my cell number and feel free to contact me. I miss that Bass, it was and is Dope AF
 
I play a Sigma bass about half the time. I'd guess most of you haven't come across one of these.
It's very heavy and has a very deep sound. Made in a limited run in the early/mid 70's by the Tokai Guitar Co in Japan.View attachment 2872841View attachment 2872845

That is extremely cool. I have the Sigma Anniversary Acoustic guitar 1 of only 100. I believe the last of the Japanese Sigmas made in 1980. A wonderful guitar. My Aunt JoAnn bought it new and left it to me when she died in 82. Needless to say it is special.

Sigma.jpg
 
Very nice quilt. Don't see Spectors in this part of the country. Arthur Nudge "What's it like?".

I very much like it. I can get almost a Ric tone out of it at times, but many more as well. I am having to get used to the 35" scale but the B string is great. The fingerboard is flatter than my Peavey Foundation V too. I got a very good deal on it used. Honestly, I simply can't believe how good it is. I feels like a bass worth many times it's price.
 
I very much like it. I can get almost a Ric tone out of it at times, but many more as well. I am having to get used to the 35" scale but the B string is great. The fingerboard is flatter than my Peavey Foundation V too. I got a very good deal on it used. Honestly, I simply can't believe how good it is. I feels like a bass worth many times it's price.

That's what matters. If it communicates what's in your mind, heart and soul,
It's priceless. That's the true value of an instrument. Everything else is materialistic.
Past that it's an expensive piece of furniture to impress your friends or yourself.
Altho' in that respect, we're guys and collections are nice... :cool:
 
  • Like
Reactions: baddarryl and EdBo
Just got a chicken backer at a cheap price. Build is pretty good and set up nicely. The bridge pup is very hot and has a nice grind. Neck one is much deeper. The sound isn't an exact Ric but not bad.
The rosewood fretboard is made of low quality wood and the neck is thicker than a real Ric. Tuners are as good as any Chinese or Indonesia bass I have played.

Overall, for 300$, is a cool backup.
20180114_195102.jpg
 
Ok, this is more quantity than quality, apart from the 1st two, but here goes...

First, the Fender class...

upload_2018-1-14_19-56-50.png

1966 Fender Precision (USA) - my wife's
1972 Fender Jazz (USA) - my wife's
2017 DIY kit bass (my oldest son built this)
2001 Squier Precision (I rehabbed this)
2017 Ammoon (bought just out of curiosity)
2012 Squier Jaguar (my youngest son's bass)

Next, the non-Fender class (these all belong to my eldest son, except for the Shaftesbury) ...

upload_2018-1-14_20-0-56.png

'70s Hondo II 4001 copy (Korean) - kinda crappy copy
'70s Shaftesbury 4001 copy (Japan) - mine from when I was a kid - excellent copy
2005 Ibanez Soundgear Rio GSR190
2015 Kapok KB5-200F 5-string bass
1999 Ibanez CT1 bass
2006 Epiphone Thunderbird

Next up, electric guitars (mainly belong to my youngest son)

upload_2018-1-14_20-5-1.png

2014 Cozart Resonator
1985 Fender Telecaster
1980s Charvel Charvette
2017 Xaviere XV900WH (Gibson ES-335)
1986 SWG Stinger by Martin
2017 Guitar Fetish neck/body build
1998 Epiphone LP
1970s Memphis LP
2010s Gibson Spirit

Finally, the acoustics...

upload_2018-1-14_20-7-48.png


2003 Fender DG-11
2014 R.W. Jameson
1986 Simon & Patrick Luther
2017 Breedlove acoustic
1997 Fender BG29 NAT acoustic bass
2009 Washburn Rover RO10B (in front)