The Sushi Box FX Secret Society

[rwkeating]

@Endomusia , you can get a "current doubler" cable for Voodoo Lab pedals. Since you have three pedals, you could double up 2 power outputs to power the Dr. Watson. https://www.sweetwater.com/store/de...rent-doubler-adapter-4-inch-str-str-y-doubler

 

[macmanlou]

@Endomusia , you can get a "current doubler" cable for Voodoo Lab pedals. Since you have three pedals, you could double up 2 power outputs to power the Dr. Watson. https://www.sweetwater.com/store/detail/PPAP--voodoo-lab-current-doubler-adapter-4-inch-str-str-y-doubler

Excellent solution, especially since then you'd only need one good mains outlet. A big advantage on the road

 

[OffTheHook]

Other than the variable HPF, what else are we looking forwards to on the Finally v3? Thinking if I should just pull the trigger on the v2 now

 

[eeyorebass]

Yup. It's still switchable so you can bypass it when you don't need it, but HPF is variable frequency sweepable from 30Hz to 120Hz.

Is the slope on the HPF still 6db/oct on the variable version?

 

[Sushi Box FX]

Other than the variable HPF, what else are we looking forwards to on the Finally v3? Thinking if I should just pull the trigger on the v2 now

The variable HPF is the only change, other than that it will have the same specs as Finally v2. There is only so much room in the box, I feel like this is probably the maximum amount of stuff I can cram in there.

Is the slope on the HPF still 6db/oct on the variable version?

Nope, that would be a little disappointing in my opinion. As I was researching filters I really liked the idea of a dual slope HPF. So this is a fixed -24dB/octave below 30Hz, then -12dB/octave variable from 30Hz to 120Hz.

 

[chiphaleonbass]

The variable HPF is the only change, other than that it will have the same specs as Finally v2. There is only so much room in the box, I feel like this is probably the maximum amount of stuff I can cram in there.


Nope, that would be a little disappointing in my opinion. As I was researching filters I really liked the idea of a dual slope HPF. So this is a fixed -24dB/octave below 30Hz, then -12dB/octave variable from 30Hz to 120Hz.

All of that sounds great though

 

[Mayo Fan]

There is only so much room in the box, I feel like this is probably the maximum amount of stuff I can cram in there.

Wait till you meet 2026 Nathan. He'll gladly accept the challenge and chuckle at your naivety.

 

[sloppy_phil]

As I was researching filters I really liked the idea of a dual slope HPF. So this is a fixed -24dB/octave below 30Hz, then -12dB/octave variable from 30Hz to 120Hz.

This is effectively what I have going on in my own setup; my amp is a Subway D-350 which has the same fixed -24Db/octave @ 30Hz, but then I use an HPF on my board which has the same slope you describe. It's brilliant as a one-two punch! Sounds like a perfect choice for the v3

 

[Sushi Box FX]

Wait till you meet 2026 Nathan. He'll gladly accept the challenge and chuckle at your naivety.

Oh I guess I could mention that Finally v3 also switched over to film caps in the preamp, so if I pulled those giant things out I could save a little space, but room on the circuit board doesn't always equate to room on the face of the pedal for more controls.

 

[Endomusia]

@Endomusia , you can get a "current doubler" cable for Voodoo Lab pedals. Since you have three pedals, you could double up 2 power outputs to power the Dr. Watson. https://www.sweetwater.com/store/de...rent-doubler-adapter-4-inch-str-str-y-doubler

Oh cool. I didn’t know about this.

 

[Parzival]

Oh I guess I could mention that Finally v3 also switched over to film caps in the preamp, so if I pulled those giant things out I could save a little space, but room on the circuit board doesn't always equate to room on the face of the pedal for more controls.

If requested, can the Finally v3 come with a 12ax7 tube?

 

[Sushi Box FX]

If requested, can the Finally v3 come with a 12ax7 tube?

Yup, absolutely. You'll still be able to get some breakup out of it with a 12AX7, that isn't going away.

 

[havnjero]

The variable HPF is the only change, other than that it will have the same specs as Finally v2. There is only so much room in the box, I feel like this is probably the maximum amount of stuff I can cram in there.


Nope, that would be a little disappointing in my opinion. As I was researching filters I really liked the idea of a dual slope HPF. So this is a fixed -24dB/octave below 30Hz, then -12dB/octave variable from 30Hz to 120Hz.

sure wish the GS had this hpf… could we get it into existing units somehow?

 

[Tassieviking]

Oh I guess I could mention that Finally v3 also switched over to film caps in the preamp, so if I pulled those giant things out I could save a little space, but room on the circuit board doesn't always equate to room on the face of the pedal for more controls.

2026 Nathan will place SMD components on both sides of the PCB with no problems, while walking on water, space will not be an issue.

 

[Tassieviking]

The variable HPF is the only change, other than that it will have the same specs as Finally v2. There is only so much room in the box, I feel like this is probably the maximum amount of stuff I can cram in there.


Nope, that would be a little disappointing in my opinion. As I was researching filters I really liked the idea of a dual slope HPF. So this is a fixed -24dB/octave below 30Hz, then -12dB/octave variable from 30Hz to 120Hz.

So I guess that means 12 x 12 filter ?
12dB at 30Hz and another 12dB is variable so that equals 24dB below 30Hz if I understand correctly.

 

[OneNut]

So I guess that means 12 x 12 filter ?
12dB at 30Hz and another 12dB is variable so that equals 24dB below 30Hz if I understand correctly.

Based on what Nathan said, I'd say it is as he said, -24dB below 30 Hz and then -12dB variable, so you get -36dB below 30Hz effectively, same as the FDeck filters.

 

[OffTheHook]

The variable HPF is the only change, other than that it will have the same specs as Finally v2. There is only so much room in the box, I feel like this is probably the maximum amount of stuff I can cram in there.

Enough to sell me to get the v2 first hahah!! Not sure how much I'd use a variable filter - more of a set it and forget it kind of person due to how consistent i want my sound. Hoping to play with the v2 soon... and who knows what's next in line!

 

[Tassieviking]

Based on what Nathan said, I'd say it is as he said, -24dB below 30 Hz and then -12dB variable, so you get -36dB below 30Hz effectively, same as the FDeck filters.

Now you are just trying to confuse me (easily done) , FDecks filters are 12 + 12 filters which mean 12dB at 35Hz and a variable filter at 35Hz to 140Hz with a 12dB slope as well, this makes FDecks filters 24dB below 35Hz.

 

[Tassieviking]

I don't want to sound negative about any Sushi Box pedals but............
wouldn't the JC Emerald look better with gold topped black knobs ?
( I think real Marshall knobs are too big )

Never mind, I must have been hanging out at the Marshall Forum too much lately, maybe I caught something...

 

[OneNut]

Now you are just trying to confuse me (easily done) , FDecks filters are 12 + 12 filters which mean 12dB at 35Hz and a variable filter at 35Hz to 140Hz with a 12dB slope as well, this makes FDecks filters 24dB below 35Hz.

You are correct and I was going by memory - I was mis remembering and thought the fixed part of the FDeck was 24, not 12.