The Sushi Box FX Secret Society

[BunchyMutt]

@Sushi Box FX could the Space Heater take a 12AU7 or AT7 if we wanted less gain?

 

[labeledbass]

@Sushi Box FX what do you think of this? its my Dr. Wattson (that I still haven't sent off.. ) but I was wondering if the tube needs a replace as well, being mini I didn't know the possibilities



Maybe this stem will work..

 

[aekisz]

@Sushi Box FX what do you think of this? its my Dr. Wattson (that I still haven't sent off.. ) but I was wondering if the tube needs a replace as well, being mini I didn't know the possibilities



Maybe this stem will work..

Yeah, that’s what mine was doing after 20 minutes of warmup.

 

[Sushi Box FX]

I’ll gladly cough up another $30 for my April Westinghouse to get a trouble free tube. Say the word.

Same here

Me too

Good to know, I figured that would be the general consensus. I don't expect the price to go up that much, I'll have to run some numbers, but I think that will probably be the way I end up going if these TAD tubes work out. TAD are more expensive but quality aside I can also get them from an American distributor instead of waiting for them to come from Russia like the 6J32P, which means I also have a reputable company I can deal with if anything goes wrong.

@Sushi Box FX could the Space Heater take a 12AU7 or AT7 if we wanted less gain?

Absolutely, it would run fine with either of those for less gain.

@Sushi Box FX what do you think of this? its my Dr. Wattson (that I still haven't sent off.. ) but I was wondering if the tube needs a replace as well, being mini I didn't know the possibilities



Maybe this stem will work..

That definitely sounds microphonic. I still have a handful (literally like 4) mini tubes, I could try swapping to see if they get quieter. Though I'm also considering "recalling" all the mini-tube versions of things for steep discounts on X upgrades. I would wind up with a shelf full of basically useless pedals, but I would sleep better at night knowing they're on my shelf instead of making their way around the music world disappointing people with noise. I guess I could scrap them for parts? Oh, or I could make a youtube series of different ways to destroy them?

Anyway, Monday morning thoughts.

 

[davelowell2]

My Westy showed up today. It says 9vdc so that’s good.

But, I do get “the squeal” on volt knob from 0 to about 2 o’clock.

Also clicking on the switch, tapping the switch and tapping the case results in a high pitched pinging.

@Sushi Box FX
What’s the procedure now? Refund? Ship me a new tube? Ship back for inspection?
I don’t want to keep it like this.

 

[Sushi Box FX]

My Westy showed up today. It says 9vdc so that’s good.

But, I do get “the squeal” on volt knob from 0 to about 2 o’clock.

Also clicking on the switch, tapping the switch and tapping the case results in a high pitched pinging.

@Sushi Box FX
What’s the procedure now? Refund? Ship me a new tube? Ship back for inspection?
I don’t want to keep it like this.

A new tube should fix the problems, so if you think you like it enough to keep it with a new tube just hang onto it for now and I'll add you to the list of people to get new tubes to when I get the tube situation sorted out. Also if you're not comfortable changing the tube yourself you could send it back to me and I could do it. Alternatively if you don't think you like it enough or don't want to wait I can absolutely take it back and give you a full refund.

I ordered 6 TAD EF86 for now, they should be here by the end of the week for me to check out, and if they work as well as they are supposed to compared to the 6J32P then I'll order a couple dozen more so I have enough for this month (12) and to send replacements for the microphonic tubes from the March batch.

 

[CATFISHMcC0Y]

I have the Westinghouse right in front of me.

There is no noise when tapping anywhere on the enclosure while it is on a flat surface. However, when I pick it up and tap the vents there is a noticeable ping/static noise.

The squeal changes it’s pitch from fully CCW to 3 o’clock on the Volt dial. At fully CCW it is an in your face squeal like nails on a chalkboard. At 9 o’clock it’s a higher pitched squeal. At Noon an even higher pitched squeal. From Noon to 2-3 o’clock it slowly goes away.

There is a ping noise when engaging the pedal.

Other than that, it adds some nice tube warmth without noise from 3 o’clock to fully CW.

mine is behaving identically to this

 

[letsgethandsome]

A new tube should fix the problems, so if you think you like it enough to keep it with a new tube just hang onto it for now and I'll add you to the list of people to get new tubes to when I get the tube situation sorted out. Also if you're not comfortable changing the tube yourself you could send it back to me and I could do it. Alternatively if you don't think you like it enough or don't want to wait I can absolutely take it back and give you a full refund.

I ordered 6 TAD EF86 for now, they should be here by the end of the week for me to check out, and if they work as well as they are supposed to compared to the 6J32P then I'll order a couple dozen more so I have enough for this month (12) and to send replacements for the microphonic tubes from the March batch.

I just got back from a short trip and my Westinghouse was waiting for me. Haven’t had a chance to plug it in yet to check the tube, but I must say aesthetically it’s a gorgeous petal. Not that that’s the most important thing obviously, but it really is a great looking piece of kit.

 

[davelowell2]

A new tube should fix the problems, so if you think you like it enough to keep it with a new tube just hang onto it for now and I'll add you to the list of people to get new tubes to when I get the tube situation sorted out. Also if you're not comfortable changing the tube yourself you could send it back to me and I could do it. Alternatively if you don't think you like it enough or don't want to wait I can absolutely take it back and give you a full refund.

I ordered 6 TAD EF86 for now, they should be here by the end of the week for me to check out, and if they work as well as they are supposed to compared to the 6J32P then I'll order a couple dozen more so I have enough for this month (12) and to send replacements for the microphonic tubes from the March batch.

Thanks.

Please put me down for a new tube. I’ll try that before I decide anything.
Do you want an email from me?

 

[Sushi Box FX]

Thanks.

Please put me down for a new tube. I’ll try that before I decide anything.
Do you want an email from me?

That would be great. I've started a list of user names of everyone that said they have a microphonic Westinghouse so I can ping people here when I have tubes to send out, but real names and emails that I can tie back to an order/serial number/shipping address are helpful.

Actually I think what I'll probably end up doing is making a new item in the shop for "replacement EF86," it will cost $0 and have free shipping, but making a formal order of it gets it into my fulfillment system so I can make sure I don't miss anyone. In fact I should probably do that sooner rather than later so people can start getting in there as soon as they find out they have a bad tube and I can just move down the list and ship them out when I get them. This way you're less dependent on my memory and being able to keep track of a list and the remembering part of the process is automated.

Edit: I hope @Sonicblaze is around as I may need help setting that up I'll let you know

 

[rjmsteel]

So I am introducing myself to the society as Nathan will be building me a Particle Accelerator based on the legendary Alembic F-2B (Twin).

Why have I noted that the PA is based on the Alembic you ask? Well because I will be running signal from my Alembic Series bass into the PA, and from there into my Alembic rack mount Superfilter which is on my pedalboard.

Looking forward to this combination as I`ve only owned the Superfilter and never had a F1-X or F2B. Having the warmth of the PA into the SF-2 will give me the tone I`ve been wanting and sure is a lot lighter than running a rig with an Aggie DB751 (which is the best my bass ever sounded). The pedalboard will output to either a Radial DI Pro/ TH 500 or both to FOH.

Rich

 

[Sushi Box FX]

I set it up all by myself! @Sonicblaze will be so proud. Alright, everyone that has a microphonic EF86 I will be pointing you to here, buy this (it's free) and I'll get a formal list of who to get a replacement tube to when I get my TAD EF86 in stock. @davelowell2 I got your email, I have you on the list already, thanks

https://www.sushiboxfx.com/product-page/ef86-replacement

So I am introducing myself to the society as Nathan will be building me a Particle Accelerator based on the legendary Alembic F-2B (Twin).

Why have I noted that the PA is based on the Alembic you ask? Well because I will be running signal from my Alembic Series bass into the PA, and from there into my Alembic rack mount Superfilter which is on my pedalboard.

Looking forward to this combination as I`ve only owned the Superfilter and never had a F1-X or F2B. Having the warmth of the PA into the SF-2 will give me the tone I`ve been wanting and sure is a lot lighter than running a rig with an Aggie DB751 (which is the best my bass ever sounded). The pedalboard will output to either a Radial DI Pro/ TH 500 or both to FOH.

Rich

I am super excited for this one. I still don't have a system in place to deal with dual builds on a regular basis (may happen eventually if I can find a good way to do it), but I made an exception for Rich after he drove down with his Alembic bass (which costs as much as my first 3 cars put together) to try some preamps out. That rig is absolutely amazing and I'm honored to offer a preamp that will compliment it.

 

[davelowell2]

it’s a gorgeous petal.

Agreed.

 

[fivestringgecko]

Alright, everyone that has a microphonic EF86 I will be pointing you to here, buy this (it's free) and I'll get a formal list of who to get a replacement tube to when I get my TAD EF86 in stock.

https://www.sushiboxfx.com/product-page/ef86-replacement

Ordered.

5sg.

 

[NKBassman]

My Westinghouse is in USPS limbo right now. I imagine it’ll be at least a week yet before it makes it north of the border and into Canada.

 

[Killing Floor]

So I am introducing myself to the society as Nathan will be building me a Particle Accelerator based on the legendary Alembic F-2B (Twin).

Why have I noted that the PA is based on the Alembic you ask? Well because I will be running signal from my Alembic Series bass into the PA, and from there into my Alembic rack mount Superfilter which is on my pedalboard.

Looking forward to this combination as I`ve only owned the Superfilter and never had a F1-X or F2B. Having the warmth of the PA into the SF-2 will give me the tone I`ve been wanting and sure is a lot lighter than running a rig with an Aggie DB751 (which is the best my bass ever sounded). The pedalboard will output to either a Radial DI Pro/ TH 500 or both to FOH.

Rich

Awesome. It is a nice addition for the warmth and the size is right too. You’ll love it.

 

[tombowlus]

Just received my Westinghouse and Space Heater today. Glad to know that I can run them both at 9V (they both say 12V). I will check for microphonic tube action (which would be a great band name, btw) and report back.

 

[moon-bass]

I just got my PA today's. Looks great! I'm having some issues as well, but hopefully will get them sorted out!

 

[letsgethandsome]

Sooooo. Had a few minutes to check out the Westinghouse this afternoon. My tube does have the whistling sound at lower volt settings But it does seem to disappear after about 1 o’clock. I may add my name to the list, or I might get Squirrley and source something myself Even as-is It’s totally usable which brings me to…

You know what? I think the Westinghouse is pretty freaking great! I really like what it does to my tone. Just adds a bit of extra fullness and girth. Exactly what I was hoping for…. Sounded great running into all my different preamp‘s. Definitely miss it when you turn it off. Initial tube issues aside, I think this thing is a winner! I really want to experiment with putting it at different places in my signal chain. I’m getting ready to rewire my whole board so I definitely Want to experiment with it before I do all that…

As always @Sushi Box FX - You’re a class act, man. You work hard when there’s an issue to find workable solutions for everybody and your communication is spot on. It’s appreciated! Hopefully these little occasional trips and stumbles aren’t taking any of the fun out of it for you because I know I want you to keep making cool things. Like....

GONDWANA!

 

[BunchyMutt]

Just received my Westinghouse and Space Heater today. Glad to know that I can run them both at 9V (they both say 12V). I will check for microphonic tube action (which would be a great band name, btw) and report back.

Looking forward to your comparisons! Especially curious if the SH can do the Westinghouse thing