• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

The Sushi Box FX Secret Society

#865
kranahan said:
I'm shipping my Slampegg off to @scubaduba so he can add some clips of it to his awesome Tube Pre/DI thread. My in-depth review will have to wait but I figured clips are more important than words anyways.
Click to expand...

Thanks in advance! @kranahan is a real good human being.
 
  • Like
Reactions: Zbysek, NKBassman, Sushi Box FX and 6 others
#867
kranahan said:
Hopefully it gets counted!
Click to expand...
And a one, and a two
2E05D3CE-2A42-4676-A78F-57EE6008529B.gif
 
  • Like
Reactions: kranahan and shaggy45
#876
labeledbass said:
Would this be too much of a likeness? This is along the lines of what I've always wanted to do with a portaflex clone. Proportions are most definitely off but this is idea, black on black, or black with silver knobs/black collar knobs, Red LED, white imprint. OR a polished box, which would be amazing but beyond some work (not sure how these boxes buff down)
View attachment 4041809
Click to expand...
Well you're clearly WAY better at graphic design than I am, so I can send you a dxf of the hardware layout and you can design something around that if you want. I could totally do something like that.
Lammchop93 said:
So I recorded an awesome demo of my Wattson, and when I went to edit it, I found out my mic was off. Time for a redo...
Click to expand...
I've been there. So many times.
labeledbass said:
I'd like to hear that too. The post office is playing pickle with my pedal, probably stuck in a ballot box somewhere
Click to expand...
Right, I forgot to get back to you on that today. Looks like your pedal finally showed up around Jacksonville, so hopefully soon, but obviously USPS is as helpful as always and have no idea when it will actually get there.
Lammchop93 said:
Here's a very quick sample of my Wattson with a cabsim. More to come tomorrow

Click to expand...

THAT SOUNDS SO GOOD. My only complaint is that it is WAY too short. I think the next demo should be at least 5 minutes to make up for it. In the meantime I'll be listening to that 7 second demo on repeat, thank you.
 
  • Like
Reactions: labeledbass, shaggy45 and kranahan
#877
Sushi Box FX said:
Well you're clearly WAY better at graphic design than I am, so I can send you a dxf of the hardware layout and you can design something around that if you want. I could totally do something like that.

I've been there. So many times.

Right, I forgot to get back to you on that today. Looks like your pedal finally showed up around Jacksonville, so hopefully soon, but obviously USPS is as helpful as always and have no idea when it will actually get there.

THAT SOUNDS SO GOOD. My only complaint is that it is WAY too short. I think the next demo should be at least 5 minutes to make up for it. In the meantime I'll be listening to that 7 second demo on repeat, thank you.
Click to expand...
The one I had recorded today that I forgot to turn my mic on was 10 minutes. Oh well. Practice makes perfect I guess
 
  • Like
Reactions: Zbysek, Sushi Box FX, shaggy45 and 1 other person
#878
So this isn't super exciting yet, but I got all the components placed on the Deep Dish Compressor (yup, that's the name I'm going with), just need to get them all connected now. I'm hoping to have layouts done for this and all the updated X Series pedals (PA and Slampegg are already done) by this weekend so I can get boards ordered and verify things so I can confirm they will be available in January.

Oh and those 20 pins next to "U5" in the middle near the bottom is going to be the LED bar for the gain reduction indicator and U5 is the driver for it. I'm not positive it will work as-is, but I made provision to disconnect it so it doesn't affect the circuit if it doesn't work on the prototype. But obviously I'm hoping it will work ;)

EDIT: looking at this picture I just realized I need to mvoe some components, they're going to get smashed by the tube mounts :P
Capture.JPG
 
  • Like
Reactions: Real Soon, NKBassman, sonofshel and 10 others
#879
Sushi Box FX said:
So this isn't super exciting yet, but I got all the components placed on the Deep Dish Compressor (yup, that's the name I'm going with), just need to get them all connected now. I'm hoping to have layouts done for this and all the updated X Series pedals (PA and Slampegg are already done) by this weekend so I can get boards ordered and verify things so I can confirm they will be available in January.

Oh and those 20 pins next to "U5" in the middle near the bottom is going to be the LED bar for the gain reduction indicator and U5 is the driver for it. I'm not positive it will work as-is, but I made provision to disconnect it so it doesn't affect the circuit if it doesn't work on the prototype. But obviously I'm hoping it will work ;)

EDIT: looking at this picture I just realized I need to mvoe some components, they're going to get smashed by the tube mounts :p
View attachment 4042152
Click to expand...
Awesome! So the X series is good to go, in theory? By the looks of the prototype in the previous pics its going to be rad, cant wait! (I saw my package leaving Jax, thats typically the stop before mine, crossing fingers! Thanks for the help
 
  • Like
Reactions: Sushi Box FX and kranahan

Latest posts

Top Bottom
Back