• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Three way muff love: BBM/GGG-tuned/Sovtek green

You could do it in an XO-sized/1590BB enclosure, but you'd have to stack the boards carefully.
Measure first.

Wounded Paw sells kits for the blender. The upside of having a blender in its own box is that you can add other pedals to the blend. If you stick it inside the BMP enclosure, you're stuck w/ that and only that.
 
You could do it in a box that size for sure.

If you were building it from scratch on veroboard you could do it all on one board, but I'd suggest trying it w/o the blend if it's your first one, and then maybe modding it later.

Thats probablly a good idea. Build now, tweak later.

You could do it in an XO-sized/1590BB enclosure, but you'd have to stack the boards carefully.
Measure first.

Wounded Paw sells kits for the blender. The upside of having a blender in its own box is that you can add other pedals to the blend. If you stick it inside the BMP enclosure, you're stuck w/ that and only that.

I know the benefits/limitations, I've owned blenders and blended pedals from time to time. I've got a very specific set of circumstances I want to slot this into so blend on-board is what I want. Someone should could out of retirement :p
 
Mudd,

If I may make a request, would it be possible to make and post a clip where you play one effect with the gain cranked, then switch to the other with the dain cranked, and then the third please?

I would like a comparison of the three at max gain. I need a second Muff to accompany may blue and gray Sovtek on my board, and I am not sure what route to go.


Here are the clips
Sorry about the volume thing.........;) Both the Tuned and the Sovtek were a little hard to control without starting and stopping.....


In clips start with fuzz at min then 12 O'clock then max

Bass: ESP/Fender Jazz
[Invalid or Expired Link Removed]
[Invalid or Expired Link Removed]
[Invalid or Expired Link Removed]
[Invalid or Expired Link Removed]

I didn't fiddle with the tone controls on any of them, all are strait up.
I find the Tuned works better for me live then the others..

Enjoy!
 
For $130 you have both.

I think I'm gonna have to build a Green Sovtek clone to go with my ggg tuned.

Are there any nice Sovtek Muff clones out there?

If you can solder there's plenty of kits available. The cheapest I've found is this one:

Invalid Link Removed

I haven't got anything from them yet so can't vouch for quality but will be ordering a few kits and other bits from them in the next week.
 
Mudd,

If I may make a request, would it be possible to make and post a clip where you play one effect with the gain cranked, then switch to the other with the dain cranked, and then the third please?

I would like a comparison of the three at max gain. I need a second Muff to accompany may blue and gray Sovtek on my board, and I am not sure what route to go.

Sure since all I have to do is cut and paste no prob ....> [Invalid or Expired Link Removed].......same order........ I think.....

I'm too tired to do anything else today though:o
 
Adding a blend means that you would have to add another board internally. It is possible, but you need an enclosure large enough to house both boards.

As long as they aren't the size of a old Sovtek I don't think anyone [other then a few weirdos ;)] would mind at all ;) I'd buy one ;).......

I think If I ever get around to making another [with a blend this time, or have one built I think I'd really like to do a gloomy the bear image on it...
gloomy.png

:D Fuzzy and violent:D
 
I completely understand why a lot of you want blends in your dirt pedals. I messed around with the idea myself. I ditched the idea and I'm running two amps. Best decision ever.

I still need to put together my Ultimate Big Muff. I imagine something along the lines of the Supercollider Beast with a toggle for choosing silicon or germanium clipping diodes and a rotary switch for dialing in different sounds in the tone stack.