• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Thunderbird Club

A little help please.

On my 2013 Gibson TBird, the bridge PUP's volume pot seems to have stopped working. Dimed I'm getting nothing and all the way down till I reach 2 I get scratchiness I can hear through the amp but no volume. At 2 the PUP is playing but of course it's about as useless as boobies on a bull.

So that I only have to do this once, what's the best drop in replacement for that pot? OEM? After-market? If you can provide a link that would be great, thanks!

Try turning the pot 0-10 back and forth quickly 10 or more times. It may just be dirty (oxidized from lack of use is the usual cause for me) and that works about 90% of the time. Pot (electronics spray) cleaner usually does the other 10%. YMMV.

As to a replacement, I'd either go with a Gibson replacement or replace all three with CTS. I don't know the Gibson 2013 specs.
 
Try turning the pot 0-10 back and forth quickly 10 or more times. It may just be dirty (oxidized from lack of use is the usual cause for me) and that works about 90% of the time. Pot (electronics spray) cleaner usually does the other 10%. YMMV.

Thanks for the response, Carlo. I did the 0-10 thing a bunch having read that here on TB. I haven't try pot cleaner(since I don't have any) but my thought was, how dirty or oxidized could it be? It's 3 years old and never leaves the house... I'm really thinking I'm dealing with a failed pot or a failed PUP.

Of course I'm hoping it's the pot. I guess I need to dig into this a bit and see if I can find some numbers on the pot to help me out.
 
  • Like
Reactions: Dadagoboi
Sorry


CN doesn't RTFM...
Norris.jpeg
 
Seeing as there's no point hanging on to this stuff .... I have the black hardware off what used to be my Epi PRO IV for anyone who wants it.

1 x high mass bridge (will need new height adjust grub screws)
4 x 3/8" Y tuners
4 x domed brass knobs

What do you want for it? I have been looking to replace the bridge on my Goth for a while now and use tuners and knobs, too!
 
Seeing as there's no point hanging on to this stuff .... I have the black hardware off what used to be my Epi PRO IV for anyone who wants it.

1 x high mass bridge (will need new height adjust grub screws)
4 x 3/8" Y tuners
4 x domed brass knobs

Hi Kat, may I be 2nd on the line, after Haji ? Just in case.
 
Real men never RTFM.

Men who don't want to experience catastrophic failure and/or electrocution often RTFM.
I guess I'm not a Real Man.

Real Men wrote TFM. Real Men RTFM. Real Men have anger issues with people who don't RTFM before basically asking for directions...because Real Men NEVER ask for directions.
I guess I'm not a Real Man due to this reason as well.

I'd rather spend a couple minutes feeling like an idiot than a half hour or more wandering around feeling like an idiot.
 

Latest posts