• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Thunderbird Club

??7 out ll
Be safe Rich. I learned a hard lesson during “snowmageddon” of ‘22. Totaled an Outback hitting a freaking boulder that slid down in a blind corner.

Frankly, I didn’t like that car so much; it was too big. But the ramifications have cost me. I love my Crosstrek.
yeah, we opted for this instead of Carson City.....
1745708416511.jpeg
 
yeah, were supposed to go to Carson City for Derby but 88 and all of those are a mess....
Yeah. Love CC. We’re a skiing family. We stay in CC or Gardnerville/Minden and start on the Heavenly Nevada side. Looked at some retirement properties in Genoa. But way too expensive and too far from SoCal family.
 
I posted this in GP, but I figured I'd ask her as well. In the place we're playing tomorrow, the house bass amp is an SWR Bass 350. I run my GK 800RB preamp pedal into the FX Return, running straight to the power amp section. I've always gotten extremely low volume from this amp doing it that way, even with its blend knob all the way wet. I have to crank the master volume on the amp and also the volume on my preamp pedal. This never happens anywhere else. I was just reading a manual I found for the amp and it mentions pulling out the blend knob to defeat the internal limiter. I never knew about this. Could this have been my issue all along, and pulling out the knob to defeat the limiter give me the expected volume without having to crank everything?

IMG_0300.JPG
 
I posted this in GP, but I figured I'd ask her as well. In the place we're playing tomorrow, the house bass amp is an SWR Bass 350. I run my GK 800RB preamp pedal into the FX Return, running straight to the power amp section. I've always gotten extremely low volume from this amp doing it that way, even with its blend knob all the way wet. I have to crank the master volume on the amp and also the volume on my preamp pedal. This never happens anywhere else. I was just reading a manual I found for the amp and it mentions pulling out the blend knob to defeat the internal limiter. I never knew about this. Could this have been my issue all along, and pulling out the knob to defeat the limiter give me the expected volume without having to crank everything?

View attachment 7212073
definitely....
 
I posted this in GP, but I figured I'd ask her as well. In the place we're playing tomorrow, the house bass amp is an SWR Bass 350. I run my GK 800RB preamp pedal into the FX Return, running straight to the power amp section. I've always gotten extremely low volume from this amp doing it that way, even with its blend knob all the way wet. I have to crank the master volume on the amp and also the volume on my preamp pedal. This never happens anywhere else. I was just reading a manual I found for the amp and it mentions pulling out the blend knob to defeat the internal limiter. I never knew about this. Could this have been my issue all along, and pulling out the knob to defeat the limiter give me the expected volume without having to crank everything?

View attachment 7212073
I will be using that tomorrow!
 
Low tension flats.
85% of what TI flats are coveted for:


Lots of praise for Los tension but doesn’t that make for a lot of fret buzz, or necessary high action? Since I only tune straight E standard 1/3 of the time I imagine low tension would be even more of a problem in Eb or D standard. Let alone on short or medium scale basses.
 
As an Amazon Associate, TalkBass may receive commissions from qualifying purchases made via links on this site.
Lots of praise for Los tension but doesn’t that make for a lot of fret buzz, or necessary high action? Since I only tune straight E standard 1/3 of the time I imagine low tension would be even more of a problem in Eb or D standard. Let alone on short or medium scale basses.
My JC came with TI low tension flats. It was professionally setup before I bought it. The string height is higher than my other basses but the low tension makes it very comfortable to play. So, your comments seem correct.
 
I posted this in GP, but I figured I'd ask her as well. In the place we're playing tomorrow, the house bass amp is an SWR Bass 350. I run my GK 800RB preamp pedal into the FX Return, running straight to the power amp section. I've always gotten extremely low volume from this amp doing it that way, even with its blend knob all the way wet. I have to crank the master volume on the amp and also the volume on my preamp pedal. This never happens anywhere else. I was just reading a manual I found for the amp and it mentions pulling out the blend knob to defeat the internal limiter. I never knew about this. Could this have been my issue all along, and pulling out the knob to defeat the limiter give me the expected volume without having to crank everything?

View attachment 7212073
From what you say, sounds like it. As you know, not all lopes are the same.
 
@TBird1958
is this Puget Sound?..



I don't think so, there's too much sand, beaches around here are pretty rocky and you don't walk around in your bare feet, also not enough Evergreen trees.
It could be at Long Beach or Ocean shores, but I don't know if they raise those lovely oysters out that way.
Ruby Beach on the west coast is really beautiful, I wish I had a better shot of it, lots of sand and heavenly to walk barefoot on a sunny day.
szOAB1I.jpg


I Love the rugged beauty of this place, I'll never grow tired of seeing it.

D5Kik2A.jpg