• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

U.S. Peavey Club

Hahaha!

I'm not familiar with the B90, I see its a PJ, What are the differences from the Foundation S?

Cheers!
Looking at them side by side, it appears that the Foundation S is a little more "refined" as far as contour. The B Ninety looks like it MAY be all passive and reminds me of my BC Rich NJ Series MIJ P/J, which was my FAVORITE bass for years, until I lost it to the pawn shop.
 
  • Like
Reactions: Bleecker
The B-Ninety came later than the Foundation S. It has the same neck as the Axcelerator with the tilt back headstock that does not require string tree. The body has those "access" cutaways for playing up high on the fretboard. Lots of companies had those at the time, a fashion thing I think. Body will be lighter than the Foundation S. Also won't have the trapezoidal bridge with huge saddles.

Also, for $150 you get a good USA made Peavey bass that doesn't need any repair work done to it! Those are the ones I like to buy. :thumbsup:
 
Last edited:
Whoa...who says it needs a refret or leveling of the board? Or a fret leveling? Jump to conclusions much? According to the OP's hands-on inspection and the pic he posted, there is no indication that any of that is needed. It should be obvious to anyone that some light sanding will clean off the crud and probably most of the stains on the rosewood. Frets don't need to come off to do that. I'm not seeing much fret wear there. What appear to be indentations in the board don't affect playability, so as long as it looks good, and plays well after a little elbow grease and a couple hours, who cares?
In my post I was asking if it was viable cost wise to, replace the finger board if it needed it to return to a good playing bass. The refret part was if you did replace the finger board then the, new board would have to be refretted. Obviously if rosewood dust & superglue and a bit of elbow grease, is all that it needs then someone will get a bargain Foundation bass :thumbsup:.
 
  • Like
Reactions: Iridescentone
I have an opportunity to buy this bass at what I think is a pretty good price. But, what do all you experts say is a good price for this? Not a great picture I know.

191230148_10225623541839004_6232650156884196438_n.jpg
 
I have an opportunity to buy this bass at what I think is a pretty good price. But, what do all you experts say is a good price for this? Not a great picture I know.

View attachment 4294472
Any price that makes it yours :)
To me a dollar is a good price. I'd say anything under $300 nowadays is a good price.
Just a little while ago these were $150-$250 all day long. Times have changed.
I always compare prices to Squier's. THE most overrated (and gawd awful) entry bass, ever. "Would I buy this over a Squier ?"
 
Any price that makes it yours :)
To me a dollar is a good price. I'd say anything under $300 nowadays is a good price.
Just a little while ago these were $150-$250 all day long. Times have changed.
I always compare prices to Squier's. THE most overrated (and gawd awful) entry bass, ever. "Would I buy this over a Squier ?"


Under 300ish? we can't see the condition from the pix
 
It is definitely under $300, only damage I have see is that there is a pretty good dent below the bridge pickup, not much else. I don’t need it, I just thought that people rated these as being a really good value for an American made bass. Also, there is no HSC case with it, which for, knocks down the value even more.
Under 300ish? we can't see the condition from the pix