Sorry for redirecting the conversation a bit, but can someone please give me the low down on the Dyna 5 string. I realize they have changed over the years and specifics would help, but I'm just looking for a general review. I have a 4 string Dyna with super ferrites and it plays like a dream, even better than my Xotics. I'm thinking about purchasing a 5 string Dyna! If there is a good chance it will play a sound like my 4 string it may be worth paying the outrageous shipping cost ($180) to get it here. Thanks in advance!!
I have a '91 Dyna 5. Pretty sure this is near the end of the run for SF equipped Dyna 5s. I got it because I love my Dyna 4 and Foundations, but ultimately, I'm a 5 string guy, so curiosity had me rabidly searching for one to try. I found this one on ebay as a project bass for super cheap--like $200 shipped. The body was refinished (nicely, though) and the preamp needed
all of the pots removed, cleaned and reassembled to work properly. That alone was lucky, try to find replacements for these... yikes! After a couple years, the neck went from a little wonky, but functional, to too wonky for reasonable use. I did just get the neck back from warped neck.com and now the bass is as good as it can be! It set up nicely and now I can experience 100% of what the bass is all about.
Does it play like the 4s? Sort of, yes. All of the usual familiar things are there-Super Ferrites, knobs and controls are the same, that great Peavey build quality, etc...
This one has the flatter radius like the 2nd Gen Dyna (12"?). The other main difference is the elephant in the room: neck profile. What they did on this version was take the 1.75" wide nut neck (as found on the T40/45/Fury/Patriot/etc... and squish 5 strings on it. The neck does feel and measure out nearly the same as my 1.75"ers. Because of this, the string spacing is rather narrow (about 16mm) by today's standards (which are usually closer to 17.5-19mm. It took me a little bit to get used to that narrow spacing. The sound is pure SF. Love it!
Other than getting used to the spacing, the other thing is the magnetic field of the SFs. I tried to get the maximum spacing at the bridge, but ran into an issue with the G string on the bridge pickup. It was just too close to the edge and the output dropped off. SFs were obviously not designed for 5 string basses, so it's clear why they changed that up as the 5 string took off.
So...I'm trying to get down to 3 basses. I have a Fury that's likely headed down the road but the prices online seem all over the place. Any idea? Hardware is nearly perfect, was refinished professionally but has a ding from an overtightened string under the bridge. It was my first Peavey and was my favorite for a long time, if the value is under $200 I'd rather just keep it.
There is at least $300 worth of parts on it, so I wouldn't sell it for less than that.