• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

U.S. Peavey Club

Are you gigging your 1st Gen Fury at all? i have rounds on mine and i need to change to flats, likely Fender 9050s but thats all ive used for flats on my Peavey basses...my 90's Foundation 5 sounds great with rounds tho and it is a great bass tho i had to redrill/reposition the bridge as it was off just enough i couldnt correct it...other than that it is stellar imo and all i need in a 5er (other than my Dean fretless 5er).

I also changed the bridge on my 90s Foundation 5, but not because the original wasn't properly located - I wanted slightly wider string spacing on mine... I used a MIM Fender 5 string bridge, and it duplicated the spacing/feel of my EBMM Sterling 5 HS... I also agree that the Foundation 5 is all I need in a 5er, and I've gigged mine hundreds of times - even though I still have the Sterling 5 HS, a Spector Legend 5 Custom(neck thru), and a Schecter Hellraiser 5... The Foundation 5 plays as well as any of them, and sounds great - it's the only passive 5er I've ever liked... Truth is, there is nothing I can't get done as a bassist with the 3 USA Peaveys I own...
 
  • Like
Reactions: DavidEdenAria
I also changed the bridge on my 90s Foundation 5, but not because the original wasn't properly located - I wanted slightly wider string spacing on mine... I used a MIM Fender 5 string bridge, and it duplicated the spacing/feel of my EBMM Sterling 5 HS... I also agree that the Foundation 5 is all I need in a 5er, and I've gigged mine hundreds of times - even though I still have the Sterling 5 HS, a Spector Legend 5 Custom(neck thru), and a Schecter Hellraiser 5... The Foundation 5 plays as well as any of them, and sounds great - it's the only passive 5er I've ever liked... Truth is, there is nothing I can't get done as a bassist with the 3 USA Peaveys I own...
Thats awesome....yea, you know a bit wider spacing would be better but i can deal with it...the question is whether to go with flats for reduced finger noise and more comfort ( i have excema and nerve pain) but the rounds sound great!
 
I am getting back into practicing everyday and I have decided to open the flight case of my Axcelerator Plus tonight to give it a look. I had not opened that case in ages. The bass is still set up. A pristene bass with no damage whatsoever, factory condition and set up by a friend. The batteries are dead. Oh my. I buy two new ones tomorrow.

This thing is amazingly built. Swamp ash body, pay ferro fingerboard, old school active electronics and a C-contour style neck with the two laminated pieces side by side, which is the hallmark of Peavey.

Yeah, I am definitely back.
 
  • Like
Reactions: mb94952 and MCF
Thats awesome....yea, you know a bit wider spacing would be better but i can deal with it...the question is whether to go with flats for reduced finger noise and more comfort ( i have excema and nerve pain) but the rounds sound great!

You can kinda see the bridge here:
Peavey Hardshell Case(1).JPG


Best part of this is I got an improved bridge, and it cost less than $30...
 
Are you gigging your 1st Gen Fury at all? i have rounds on mine and i need to change to flats, likely Fender 9050s but thats all ive used for flats on my Peavey basses...my 90's Foundation 5 sounds great with rounds tho and it is a great bass tho i had to redrill/reposition the bridge as it was off just enough i couldnt correct it...other than that it is stellar imo and all i need in a 5er (other than my Dean fretless 5er).

Yes, its been to my last two gigs. Both outdoors. I used it for about 8-10 half step down songs. I have Chromes on it which I love with Super Ferrite pups. I used it alongside my Bongo on the last gig. Sounded every bit as good in the mix with tone pot on about 3/4. Always get good feedback when I do use it. I think the Fender 9050's would be good as well...that's what I have on my Patriot. But I'm currently in love with Chromes.
 
Thats awesome....yea, you know a bit wider spacing would be better but i can deal with it...the question is whether to go with flats for reduced finger noise and more comfort ( i have excema and nerve pain) but the rounds sound great!
Cobalt flats are really bright, like 90% as bright as rounds when new, and they hold that brightness for quite a long time, relative to other flats I have tried.
There is also pressure/ground/half wounds if you like the round thing with a softer feel.
 
Cobalt flats are really bright, like 90% as bright as rounds when new, and they hold that brightness for quite a long time, relative to other flats I have tried.
There is also pressure/ground/half wounds if you like the round thing with a softer feel.
I haven't tried the half-flats... I've been trying GHS Precision Flats Regular. I'm not real good with the fingers so stiff strings keep me from bending too much. So far they've been nice and punchy.
 
I can’t stop thinking about the simple elegance of this beauty!


One got away.... first year Peavey Fury.

I'm kind of glad I didn’t have the winning bid...at least that’s what I’ve been telling myself since 12:30 this afternoon....I’m not quite convinced yet.... I think :thumbsdown:

upload_2019-10-15_20-0-17.png
 
So what is the difference between the Forum AX and the Axcelerator?
Not a great deal. Forum AX has ash or alder body and an ABM bridge. Axcelerator has a poplar body and a cheaper bridge,unless it's the 2-Tek version. I think the Forum AX also has a wider nut.

They both share the same preamp. The Forum VFLs have a different shell from standard VFLs.
 
  • Like
Reactions: B-Mac

Latest posts