• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Vintage masking tape

I'm thinking of adding this mod to my Squier Affinity, but I'm worried that it might affect the value of the instrument.

I'm also wondering about the shipping cost. It seems rather low. I don't want to cheap out and cut corners on something like this.

1965 Fender Stratocaster Cloth Wire Masking Tape Original Vintage Strat Pickup Wire Grouping Early-Mid 1960s Telecaster Strat Tele P Bass | Gear Galore | Reverb
Was 65 a transitional year for tape?
It could be post CBS?
 
  • Like
Reactions: LoveJackBruce
LOL! Just picture this with blue masking tape holding the cord down:

Dean Banjo.jpg
 
I actually own some vintage masking tape.

songlist.jpg


It's an old, original song list from one of my first bands, with the original masking tape that held the song list to the mic stand. It's odd, I don't remember some of the songs on the list, and it appears that there were some original songs. Gary's song and Neils song. I'm also not sure how we could have possibly played Saturday in the Park. We had a Sax player, and we had a keyboard player, but never at the same time. Weird.

In any event, I'm holding on to my vintage tape. It's probably going to go up in value before too long...
 
High End Masking Tape described below. WIKI

Tapes based on polyimide films can resist molten solder in electronics applications.

High performance thermally conductive polyimide film
DuPont™ Kapton® MT+ polyimide film is a homogeneous film possessing over 3x the thermal conductivity of standard Kapton® HN, while retaining the strong mechanical and dielectric properties you expect from a polyimide film.

Kapton® MT+ offers the highest thermal conductivity of any polyimide film on the market and offers excellent breakdown voltage, mechanical resilience, and flexibility to make it an ideal substrate to incorporate into an electrically isolating thermal solution for your electronic or automotive application.

Performance:

  • Thermal conductivity of 0.8 W/m·K
  • Dielectric barrier of 5 kV/mil
Applications:

  • Lithium-ion Battery cell/pouch wrap
  • Electric motor slot liner
  • Heater circuits
  • Power supplies
  • Ceramic board replacement
  • Thermally conductive flex circuits

Kapton® MT+ film dramatically improves heat dissipation of the new slot insulation systems
 
  • Like
Reactions: MattZilla