TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
That's what I used.Hercules are what I use for all my hangings.
yup, saw that...thus my comment. My opinion they're the best hangers available. Unless the screws come out, it's impossible for an instrument to fall.That's what I used.
I used longer screws than the ones that came with the units.yup, saw that...thus my comment. My opinion they're the best hangers available. Unless the screws come out, it's impossible for an instrument to fall.
Yep, used significantly longer screws through the drywall into the studs. They aren't going anywhere.The screws that come with them are no good for putting into wooden studs.
Those screws are for the plastic anchors, but I recommend using the stud instead.
I always look for a 2x4, then use 3" screws.I used longer screws than the ones that came with the units.
I'm very happy with the four I've narrowed it down to. That said, a PJ Saratoga is probably in my somewhat distant future.Well if you have to narrow it down to just four, the four you've chosen would be pretty much be exactly what I would keep if and when I have to thin the herd. That may be coming to my music room sooner rather than later. Those plus an upright would cover every gig I do.
Unfortunately this one has a little of the instrument in the passageway, because that's where the stud was.