Worship Bass Pedalboards

[FenrirofOld]

Temple board. Unless you mean its given name. I don't think he's mentioned that before. Possibly Simon.

No that's perfect thank you. I like the concept.

 

[moorebass]

So, I've been collecting pedals and learning a lot. Some traded for, some bought, some still in a return window, and a loaner. Each week's assembled rig gets better and better.

Decided to put it all chained together and have some shoot-outs and placement/gain/staging exercises. We got a clean boost, compressor, 4 octaves, 2 overdrives, 2 fuzzes, 1 chorus, multi-effects, and the Bassrig. I learned quite a bit today doing this.

I still have 2 pedals incoming this week; Broughton Locust Star (Rat variant) and Pork&Pickle - to add to the insanity. I don't serve again until March 17, so some time to go divergent, then hopefully converge into something better. Actually, I will end up with two boards, a Mono Lite+ (Nano+) and Mono Lite (Nano) - so I don't have to make any final hasty decisions.

That escalated quickly

 

[KevyKev]

Are you using hook & loop everywhere rather than their fasteners?

Yes I am. I've used their mounts in the past and they are a huge pain to remove. I trade often and it drove me crazy trying to peel off those mounts. The glue they use is nasa worthy. This dual lock works much better for me.

 

[KevyKev]

No that's perfect thank you. I like the concept.

Temple DUO 17. I guess I should give it a name???

 

[Miles_ONeal]

Temple DUO 17. I guess I should give it a name???

I vote for Simon Temple, in honor of Simon Templar (The Saint).

 

[carsonchilders]

Nice to see another Type One chorus out there. I really like mine. I was thinking about trying to find a smaller one, but that tone with that one knob....

btw, I've seen some of your videos. Great work!

Hey thanks a ton!!

I like it a lot. I need to get used to the choruses signal sounding a little quiet (because of phase cancelation). The pedal is distorting a little now because then internal pot is 100%. I need to take it down a little.

 

[carsonchilders]

Yes I am. I've used their mounts in the past and they are a huge pain to remove. I trade often and it drove me crazy trying to peel off those mounts. The glue they use is nasa worthy. This dual lock works much better for me.

I also opted for dual lock on the build I just posted

 

[NickyBass]

Hey thanks a ton!!

I like it a lot. I need to get used to the choruses signal sounding a little quiet (because of phase cancelation). The pedal is distorting a little now because then internal pot is 100%. I need to take it down a little.

Ah, I didn’t know about the internal trim pot. I really only use mine for 2 songs. It takes up a lot of space for 2 songs, but I don’t have anything else to put in that spot, so it stays. I run it at 12v.

 

[NickyBass]

So, I've been collecting pedals and learning a lot. Some traded for, some bought, some still in a return window, and a loaner. Each week's assembled rig gets better and better.

Decided to put it all chained together and have some shoot-outs and placement/gain/staging exercises. We got a clean boost, compressor, 4 octaves, 2 overdrives, 2 fuzzes, 1 chorus, multi-effects, and the Bassrig. I learned quite a bit today doing this.

I still have 2 pedals incoming this week; Broughton Locust Star (Rat variant) and Pork&Pickle - to add to the insanity. I don't serve again until March 17, so some time to go divergent, then hopefully converge into something better. Actually, I will end up with two boards, a Mono Lite+ (Nano+) and Mono Lite (Nano) - so I don't have to make any final hasty decisions.

I love doing shootouts. This past week it was overdrives. There are a few battling it out.

 

[Naack]

I have a Horrothia Type One Chorus and I will never part with it. Such a good chorus and dead simple to get great tones from!

 

[projectapollo]

Pedalboard build, I’ll do a video on it when I settle in to it.

tuner - noble - switcher - LAB - Capo - Flint in CAPO loop

outs on the side:
-clean 1/4 (noble) out
-1/4 amp out

XLR outs:
-noble
-pre CAPO
-post CAPOView attachment 5374386

Enjoyed your CAPO video. You still liking it?

 

[projectapollo]

I love doing shootouts. This past week it was overdrives. There are a few battling it out.

Tell us the results.

 

[NickyBass]

Tell us the results.

Right now the Browne Amplification Carbon and the 1981 LVL are battling it out with the Teeth. I really like the Teeth, but there’s something with the pick tone that I love on the other two.

 

[carsonchilders]

Enjoyed your CAPO video. You still liking it?

Loving it!!!!

 

[carsonchilders]

Those cables are on point! Nice work brother. My OCD is pleased

Those are by Jonathan McKeown, I can’t take credit for it!

we even left circles if lack under it for when I change out pedals in the switcher.

 

[Killens84]

My board with the addition of the Octabvre

 

[MikoFX]

My board with the addition of the Octabvre
View attachment 5375095

Sweet & simple, with a nice selection of top-tier boxes! I bet that sounds fantastic!!

 

[wolffire99]

Pedalboard build, I’ll do a video on it when I settle in to it.

tuner - noble - switcher - LAB - Capo - Flint in CAPO loop

outs on the side:
-clean 1/4 (noble) out
-1/4 amp out

XLR outs:
-noble
-pre CAPO
-post CAPOView attachment 5374386

Did you drop the 29 Euna?

 

[projectapollo]

You all post the most interesting components. I'm constantly looking up these things. The vortex deepens.....

 

[FenrirofOld]

My board with the addition of the Octabvre
View attachment 5375095

I love how the Bass Blaster sounds. Did they ever do any sort of reissue on that? It is discontinued right?