• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Yamaha Club Part II

heymelbs - #314

I have an RBX550 that looks nearly identical to your RBX650 except for the headstock. I wonder what the differences are between the two models? (I replaced my stock pickups with Seymour Duncan quarter pounders and currently use it as my E-flat bass).

Scamp73 - Sorry, bro..this is the "Basses [BG]" forum! Maybe you should start a thread in the "Amps" forum. Heck, I've got both BBT210s and BBT410s cabinets!
 
ZubenElGenubi said:
heymelbs - #314

I have an RBX550 that looks nearly identical to your RBX650 except for the headstock. I wonder what the differences are between the two models? (I replaced my stock pickups with Seymour Duncan quarter pounders and currently use it as my E-flat bass).

Don't know a lot about the 550. Are you pleased with the pickup upgrade? What differences between the stock pickups?
 
Don't know a lot about the 550. Are you pleased with the pickup upgrade? What differences between the stock pickups?

Very pleased with the upgrade. The stock pickups just sounded thin (especially the P-bass pickup compared to my BB400). Since I planned to play more contemporary rock on this instrument, I decided to go with higher output pickups.

The Seymour Duncans (Quarter Pounders, SPB-3 & SJB-3) are hotter and are most noticeable in the lower midrange. I don't have as much on the E-string as I would like, but it's an improvement.

The only issue - and it's minor - is that the pickup mounting screws don't match the original holes. Also, the pickups are smaller than the cavities because the original ones have large covers. It took me two installs to get them to align with the strings well.

I don't know how well you can tell from the pic below, but here's mine:
attachment.jpg
 
I don't know how well you can tell from the pic below, but here's mine:
attachment.jpg

Looks a lot like my except for the headstock.

The neck on mine is about the best that I've ever played. Smaller jazz neck with p pickups, I can get really fast on it.

I need to check the grounding on the bridge, case I'm getting a little buzz when I take my fingers off the strings. Did you have any issues with this?

I'm not wildly crazy about the pickups, but for the stuff I do the P's work out just fine. I can make mods on the amp settings or add some jazz pickup to give it a little brighter punchier tone. There are times that I do like the muddy sound, and these pickups definitely bring that...

Looks like we might have the same bridge, can't tell cause the picture is a little blurry.
 
Hi, I have owned the trb5 since 1997, trb5f since 2004 and just got the BB425.

Pictures were originally posted in BB425 thread.

The fretless electronics were changed over to Bartolini and the bass sings more now. Some day I plan on having the fingerboard treated. The trb5 is stock and has TI Jazz Roundwound strings which is not usual but I like the woody growl they have. The BB425 I strung up the other day with D'Addario Half round super long scale strings which will probably stay. I like half rounds on the fretless too.
 
Hi! Sorry for the delay on me. The TRB is (I guess) from mid-90's. It was fretless when it came from the factory but when you look at the fingerboard, it has strips of rosewood at the spots where the frets would be so it looks like it's been modded. All in all, it's a really nice instrument with a SUPER fast neck and nice versatile active electronics. When I play it I always regret of selling my TRB-1006 6-string :bawl: :D

For the BB, I'll throw some more pictures of it:

IMG_4543.jpg

sorry for the hand :p

As long as you're not giving me the finger - all is good.:D