• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Zoom b3 patch Ideas

Any ideas for a patch to emulate the Twiggy Ramirez bass tone on like Love song? He seems to have a slight distorted tone and and deep but punchy tone. I just got my Zoom B3 and I cant find that sweet spot. The pick-ups in the Thunderbird are dark and I cant seem to get rid of that. I have lots of basses, but the one I need for this project just blows.

Thanks in advance!

Give this patch a try.

Tube bass driver

Section 1: optcomp: drive: 5, tone: 40, level: 90

Section 2: t-scream: gain: 30, tone: 50, level: 100, balance: 25

Section 3: svt: bass: 4, mid: 7, treble: 5, midfq: 250hz, gain: 50, level: 57, ultra: low, cab: ag1x15, mix: 50
 
Got one of these in route to me, this is a pretty decent sized thread to go through, which I'm sure I'll do when my pedal gets here, but I was just wondering if anyone had gathered these together in a spreadsheet or something like it?

Thanks.
 
I've been experimenting with my B3 for several months. I can't seem to find the tone I'm looking for. I currently prefer my sound plugged straight into my head w/o the B3.

I think what I'm looking for is 2 patches - one for each of my 2 basses. The idea being a single patch per bass for general use - to enhance the tone of each bass - instead of a patch by song.

My rig is an Eden WT550/D212xlt/D210xst
By basses are 1/2008 Fender Am Std P 4 with GHS P flats 2/2006 EBMM HH Stingray 4 with D'Addario XL balanced tension rounds

So what would be a good patch for my P - and Ray - for general use? Not too much effect - just a good, solid, clear, classic rock type bass tone. I'm a basement "lone wolf"/MP3 type player - I don't play extremely loud - and like a solid bottom end.

Thanks in advance!

;)
 
I think what I'm looking for is 2 patches - one for each of my 2 basses. The idea being a single patch per bass for general use - to enhance the tone of each bass - instead of a patch by song.

My rig is an Eden WT550/D212xlt/D210xst
By basses are 1/2008 Fender Am Std P 4 with GHS P flats 2/2006 EBMM HH Stingray 4 with D'Addario XL balanced tension rounds

So what would be a good patch for my P - and Ray - for general use? Not too much effect - just a good, solid, clear, classic rock type bass tone. I'm a basement "lone wolf"/MP3 type player - I don't play extremely loud - and like a solid bottom end.

Thanks in advance!

;)

For the most part, a patch-per-bass is how I use my B3.

For my rounds (passive P), I usually have a compressor first, then a 'Splitter' for more control over highs/lows, then some kind of dirt/overdrive (mostly the "Bass Drive").

For the bass w/flats (active P/J), I have a compressor, dirt ("Bass Drive") then a specialty effect that I use on one song.

I also have a separate patch with a phaser/wah/reverb that I use when a song is super boring and I need to keep from falling asleep by just droning a low end Stranglehold-type-thing (American Woman comes to mind).

Each patch has the level balanced so that it is the same when switching effects on and off, and switching between patches. I never touch the amp.
 
  • Like
Reactions: Guiseppe
My current favorite "pedals" in the B3 are:
T-Screamer (gain and tone at 55...balance at 40), Big Bottom B (Bass: 2, Treble: 1)... these two are on all the time. Sounds great through any rig. The last effect is the Vintage Chorus...only at 25-30% mix wise. Gives the tone a nice, subtle shimmer for leads and melodic stuff.
Love, love, LOVE the B3.
 
My current favorite "pedals" in the B3 are:
T-Screamer (gain and tone at 55...balance at 40), Big Bottom B (Bass: 2, Treble: 1)... these two are on all the time. Sounds great through any rig. The last effect is the Vintage Chorus...only at 25-30% mix wise. Gives the tone a nice, subtle shimmer for leads and melodic stuff.
Love, love, LOVE the B3.

Hey Don, thanks for that :D
I like the tone with the first two on. With my Ray, I find there's a bit to much string noise with the chorus on, so I just have the T-Screamer and Bottom B going and it sounds great. Thanks.
 
Here are some clean patches I came up with. Numbers are in left-right order as you go through the pages for each effect.

BD Clean
ZNR: 7, GtrIn, 100
Exciter: 3, 8, 140
BassDrive: 0, 0, 0, 50,100, 150, -6


GrindClean
ZNR: 7, GtrIn, 100
Exciter: 7, 9, 100
B-Man: 5, 6, 4, 630, 75, 100, on, orgn, 0

Hartke
ZNR: 7, GtrIn, 100
Exciter: 5, 7, 100
HRT3500: 0, 0, 0, 200, 50, 100, 4, orgn, 0

Mr. Clean
ZNR: 7, GtrIn, 100
AcBsPre: 60, 10, 100, 4, 2, 350, 0, 4, 5
Exciter: 6, 8, 105