Nice job Ampeg. Identify the problem. Own up to it. Correct it. Make sure it doesn't happen again. Manufacturing 101.
Consider my faith restored.
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
2013 Ampeg V-4B 100W Reissue Pt2
- Thread starter Chef
- Start date
Nice job Ampeg. Identify the problem. Own up to it. Correct it. Make sure it doesn't happen again. Manufacturing 101.
Consider my faith restored.
Solid response and explination if the problem Hodgy. I would recommend buying the v4b now that they have found the problem and it was a miscommunication. Not an issue with quality of parts or construction.
+1!
This, if totally correct, is a totally regrettable but completely understandable unfortunate mix up and kudos for the quick action!
This, if totally correct, is a totally regrettable but completely understandable unfortunate mix up and kudos for the quick action!
I have a PF-500 (same pre as the 800) and comparing that to my svt/v4 I'd say it's more on the svt sounding side, a little more low-mid voiced. Based on how the new V4B compares to the vintage I'd say you be in the right ball park with these new amps and a little eq tweaking.
Using my amazing powers of 20/20 hindsight I bet it would have been cheaper to have a 120/240 switch on them amps than what it's going to cost them in lost reputation and to rewire them and ship them all over the place back and forth - maybe they can take it all out of their bean-counter's salaries (yah right) ?
Wow, you are really down on Ampeg and take every opportunity to push Fender, what's up? Both are making great tube Amps and should be encouraged to continue to do so. There aren't a million viable options out there.
Using my amazing powers of 20/20 hindsight I bet it would have been cheaper to have a 120/240 switch on them amps than what it's going to cost them in lost reputation and to rewire them and ship them all over the place back and forth - maybe they can take it all out of their bean-counter's salaries (yah right
I believe the reason this is avoided is regulatory limits in certain areas. If you want to market an amp globally you have to apply the most stringent rules to simplify manufacturing and this is one of the sacrifices. I was trying to find the exact regulation and couldn't, but I found this Invalid Link Removed on the subject.
I only mentioned Fender once in response to a question about what else is comparable - and actually hated on their "normal" bass amp EQ. The 100T has Ampeg style EQ so is a good alternative.
There actually are - not a million but at least a dozen. OTOH I'd love a V4B over a pair of 212's
. I'm really enjoying my Micro-VR too, I have a pair of the SVT210AV cabs for it - with the limiter off it gets plenty tubey IMO. I do worry a bit about it though, I haven't tried it with both cabs at volume yet - and that incident about one burning up a cab at zero volume has me worried too 
.
I have both. PF800 is a very nice micro amp, but the V4B blows it away in everything but volume and light weight-ness. OTOH, it's only 41 lbs and will still make children cry, so it's become my main day-to-day amp and the PF800 is its very capable backup.
I was also one that got a dead V4B, but fortunately the replacement worked fine. I have one other issue that I have noticed that is cosmetic. I was so happy over the great tone when I finally got one that worked, that I didn't notice that the metal trim piece that runs along the very bottom of the front control panel is loose. Every Ampeg head has one of these trim strips and everyone I have ever seen is tight.
Is this easy to fix? What might I have to do to make it tight?
Thanks for your help.
Is this easy to fix? What might I have to do to make it tight?
Thanks for your help.
Mine's the same way.. there are holes for 4 rivets underneath it mounting it to the face, but there are only 2 rivets in place.. hence, it wobbles...but it doesn't really bother me. If you wanna fix it, probably the easiest way would be remove the amp from the case (upside down) and get a pair of small small small bolt screws and nuts and just wrench em down..
Last edited:
Rivets????? You're kidding,right?
I emailed Ampeg tech support. Let's see if they will resolve it. Otherwise it's going back to the retailer and they can deal with it. I've been playing Ampeg products for over 40 years and not run a cross this. In addition to great sound I expect perfect cosmetics when purchased new out of the box.
Not too much to expect.
I emailed Ampeg tech support. Let's see if they will resolve it. Otherwise it's going back to the retailer and they can deal with it. I've been playing Ampeg products for over 40 years and not run a cross this. In addition to great sound I expect perfect cosmetics when purchased new out of the box.
Not too much to expect.
My Sweetwater rep called yesterday and said they received a working, tested V4B. He is sending it Monday, should be here Tuesday. When the repaired head arrives back here, I will send it to Sweetwater. I hope this one is great, because it's definitely the last shot that one of these gets.
I sounds like you are talking about these four fasteners. Loud would want you take it to a service center to retain your warranty. As was mentioned a small sized machine screw, lock washer, and nut would take care of it if you wanted to fix it yourself. On the vintage amps this was a single piece.
Last edited:
Have they (or Ampeg) mentioned any compensation for your troubles? Perhaps a coupon or store credit towards future purchases?
