TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
presently looking for a loop switcher, it must be as simple as possible.
I want to switch from my high gain drive to my low gain with only one stomp, Im constantly switching on the new compositions with the band amd the changes have to be lightning fast.
Other than the Boss LS2, are there any « simple » solutions.
the smaller and the less connections the better.
So far the Boss ls2 seems to be the front runner.
for example in loop A would be the high gain, and straight out would be the low gain. avoiding 2 separate loops and extra cables.
So far the Boss ls2 seems to be the front runner.
for example in loop A would be the high gain, and straight out would be the low gain. avoiding 2 separate loops and extra cables.
I’ll check it out, my high gain dirt is the MBD2, easily one of my favourite dirt pedals ever.If that means you could live with one loop, then I'd peek at the Damnation Audio Dirt Fixer for the EQ and Blend features.
That said, the Boss is a classic and pretty simple. Good price and easily found new or used.
I already have two custom pedals made by Saturn works, forgot about that one, thanksMaybe Saturnworks might have what you are looking for. They are basically the go-to for oddball connection pedals, order-switchers, feedback loopers, etc. and I'm pretty sure if you email them they will wire up something custom based on what you want. The cool graphics are a bonus.
Watching/sharing this for the live sampler use.
This might not fit here, but I might head over to another major metropolis for an in-stock 2020 cheapest Sadowsky 5-string PJ bass - certainly don't need it, not my go-to sound (which is wide-ranging, from Ric to Gibson to Alembic and beyond) but a great deal (50% off) - issues apparently with that release (thank you internet?) but I'll see if I can put up with them. Would like a full-scale 5-string for the low-B if needed - but what do I really need?! Make my own sounds, do I need a "normal" sound "just in case"? And "normal" in this case seems to be Sadowsky Jazz Bass normal a la Marcus Miller? Oh well, it'll make a fun day-trip to a city I don't normally go to - try some interesting food with my wife, other possible shopping - wish me luck!
This might not fit here, but I might head over to another major metropolis for an in-stock 2020 cheapest Sadowsky 5-string PJ bass - certainly don't need it, not my go-to sound (which is wide-ranging, from Ric to Gibson to Alembic and beyond) but a great deal (50% off) - issues apparently with that release (thank you internet?) but I'll see if I can put up with them. Would like a full-scale 5-string for the low-B if needed - but what do I really need?! Make my own sounds, do I need a "normal" sound "just in case"? And "normal" in this case seems to be Sadowsky Jazz Bass normal a la Marcus Miller? Oh well, it'll make a fun day-trip to a city I don't normally go to - try some interesting food with my wife, other possible shopping - wish me luck!
@monsterthompson
on the mbd3, is it possible to switch from the high and low gain sounds and having both at the same nominal level.
(not one of the sounds boosted is what i mean)
This would be my preferred solution if this is possible with the MBD3
I knew the hype of perfection on the Damnation audio thread might not all be true.This was asked about in the Damnation thread and the answer is no, which has been my experience.
Engaging the boost can be done without creating a wild jump in output but it takes some tweaking and means you might be limited to only a certain amount of boost. It is a clipping circuit so at some point you will effectively be limiting the signal so more saturation won’t mean more output. Running low gain and engaging a high boost will certainly push the output. Running a mid to high gain and engaging a moderate amount of boost will be less likely to create a volume spike. Of course you run into the issue of the clean blend not changing with boost settings. As you can see it becomes a bit of a balancing act.
I knew the hype of perfection on the Damnation audio thread might not all be true.
Your experience with the pedal and the ensuing results are exactly what I was expecting.
Gain staging 101 right there.
It’s a great pedal, but it doesn’t have magical elves inside it.