• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Best Strings for Ibanez Mikro Bass GSRM20?

Actually the leads are quite long. I didn't cut them down before installation. They go about 2.5 times around the posts.
 

Attachments

  • IMG_20210630_144718194[1].jpg
    IMG_20210630_144718194[1].jpg
    668.4 KB · Views: 187
Now I have not put any of these on a Mikro, but have used them on another short scale: Stringjoy, which has 5 different short scale sets, and GHS Balanced Nickels.
Now if you have $85 to invest, or burn, depending on your opinion, you can splurge on the Thomastik-Infeld Jazz Rounds. I have not bought and used these on Mikro and they are 32 inch scale if I recall, so I would get
confirmation they would work before taking the big plunge .
 
Now if you have $85 to invest, or burn, depending on your opinion, you can splurge on the Thomastik-Infeld Jazz Rounds. I have not bought and used these on Mikro and they are 32 inch scale if I recall, so I would get
confirmation they would work before taking the big plunge .

Something feels a little wrong about $85 strings on a $150 bass, haha. But I'm sure they would sound good.
 
As far as I can tell, from much reviewing & investigating, these are the best you'll find:
P02852.png

I'd love to get some in Stainless, but they'd need to be special-ordered to get the diameters I'd prefer.

Just got this bass. A real gas! I have a 40-100 set of these in Super Slinky I'm going to try out. Then probably some Rotosound 40/55/75/90 depending on how the Slinkys fare. I have the ultra-light Funk Masters on my Sterling and love them.
 
Just got a 28.6” scale J Bass from CNZ audio. Not bad for $180! But the strings need to be changed to flats. Other than the Mikro strings, I see people talking about using various brands, but are they for 28.6” scale? I’m of the opinion that it’s not good to wrap the winding of a string around the post, especially flats… so are there brands of flats (I’ve seen reference to DR and D’Ads) that fit properly?
 
Just got a 28.6” scale J Bass from CNZ audio. Not bad for $180! But the strings need to be changed to flats. Other than the Mikro strings, I see people talking about using various brands, but are they for 28.6” scale? I’m of the opinion that it’s not good to wrap the winding of a string around the post, especially flats… so are there brands of flats (I’ve seen reference to DR and D’Ads) that fit properly?
Just by eyeballing the picture, the maximum full-winding length requirement looks to be a wee little under 32 inches. Of course I may be wrong.

Technically:
Thomastik-Infeld (35.5" full winding), DR and Pyramid (both around 33.5") "short-scale" flats are too long for your mini Jazz.
Dogal (reportedly around 32-7/8") and GHS (32.75") also are.
Rotosound and La Bella too, if by a smidgen (32.25").
Dunlop and D'Addario should be *almost* right (32"). Optima and Galli may be in this latter group, not sure.

Practically speaking:
on the one hand, strings stretch when at pitch (.25" or so?), which doesn't help in your case; on the other, we're talking stiff, flatwound strings yes, but in normal gauges and on a sub-short-scale bass. Less tension. Your risk of the E string breaking at the post may be, well, acceptable. La Bella LTF and T-I flats (assuming 3-1/2 extra inches of full winding do physically fit on the post) are inherently more flexible than most, ergo arguably even less risky. Dunlops too.