• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Big upgrade in store for meee

Well no I know the cable is trs.. right? That's why the jack is so thick big on the end right? He swore this was shielded though. I just told him I want the best amp to cab jack you got.
Nope - TRS cable is Tip-Ring-Sleeve, which is NOT what your cables are.
But that's OK, because TRS is NOT what you want for speakers.

Seriously, read the article I linked...I read it when it was originally published in Bass Player mag back in 1992, and it has ALL of the information you need to successfully piece together your system.

I can't help you any more than that....peace...good luck.
 
Where it says "first off check your cables" what does the author mean about shielded cables. Is that not what I have? @groovaholic
When in doubt, Google or Wiki...

Here's a good start for your reading list:
Also (to answer your question):
Invalid Link Removed
 
No, it's TS not TRS. You do not want TRS, you do not want shielded. You also probably shouldn't listen to somebody whose livelihood depends on telling you what he thinks you want to hear.

Are you saying I have a ts? Or it's called a trs? Cuz if you look it up it's called trs...

I just slapeth thy bass good sir, not really I don't slap a lot. Idk what to buy man I though the dude with the name tag behind the counter would know, he did say he was a drummer though so go figure.
 
Last edited:
Are you saying I have a ts? Or it's called a trs? Cuz if you look it up it's called trs...

I just slapeth thy bass good sir, not really I don't slap a lot. Idk what to buy man I though the dude with the name tag behind the counter would know, he did say he was a drummer though so go figure.

You have a TS cable. This refers to the type of connector. TS means Tip-Sleeve. Look at the cable end, see that it is divided by a black line into two sections, a Tip and a Sleeve.

A TRS cable means Tip-Ring-Sleeve. It has two black lines dividing it into three sections, a Tip, a shorter Ring section, and the Sleeve section. You don't need one of these for anything you're going to be doing with your bass rig. These are more for certain types of studio gear and mixers and whatnot.
 
TipsTricks02-300x157.gif
 
For bridged, you'd need a Speakon --> 1/4" cable.

You should never ever run a bridged amp into a 1/4” phone connector! They can not handle the voltage or current safely. Its also dangerous for the amp as the metal shroud of the plug is live with respect to ground. This is a shock hazard and if it comes in contact with anything at ground potential shorts out one side of the amp.