• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Club Alleva-Coppolo (Part 13)

Status
Not open for further replies.
Hopefully not lemon oil. That's a cleaner/solvent, not a treatment oil.

:D Lemon oil is mineral oil (probably 99%+) with a solvent added (in lemon oil's case, 'lemon oil'!). It is just fine for boards and has been used by luthiers and set up guys for decades and decades and decades.

There is pure, food grade 'lemon oil', but that is not sold for fretboard care.

It is needed, at most, once a year on RW and ebony boards... at most.

I agree, you don't want to use furniture polish labeled 'lemon oil' since they put a bunch of other junk in there (silicone, etc.) . Otherwise, it is just fine and does a great job of cleaning and preserving a board, even though most boards probably never need oiling anyway.
 
:D Lemon oil is mineral oil (probably 99%+) with a solvent added (in lemon oil's case, 'lemon oil'!). It is just fine for boards and has been used by luthiers and set up guys for decades and decades and decades.
Yeah, that's what I'm referring to, and I know it's been used for a long time. I don't want to open this huge debate (again, and again), but I subscribe to the school of thought that suggests those oils with the solvents blended in, if used enough over time, tend to leech out the wood's natural oils, and actually have a detrimental effect long term. I prefer to only use the oils with solvents as cleaners, wipe them off right away, and then use non-solvent oils for treatment.

Could be Ebony isn't really a good case due to its density, where maybe rosewood is. It may take a long long time for ebony to actually see noticeable effects, but I would think rosewood might suffer in a more significant time frame.

Bottom line, if there's even just a potential risk, and it's no extra hassle to use something that doesn't carry any potential risk, then why not just always use the "safe stuff", right? At least that's my feeling on it.

I know you differ with me on this, but that's ok with me too. Just MHO. :)
 
Just to "weigh in", that actually makes my LG on the heavier side... it's just shy of 9 pounds... on a pretty accurate scale. That said, I specifically requested that (as close to, but not over, 9 pounds... and he perfectly nailed it), so he may have actually selected a slightly heavier piece of alder than he normally would have.
.

+1...mine's 8.95 pounds.
Just perfect for me in a 5 with alder.
 
Hey guys,
Here's an LM5 on Ebay. I am not affiliated with the seller who is in the U.K. but it sure does look like the bass I bought from jonno and later I sold it to Mike in Texas. Maybe someone across the pond is looking for one.

http://cgi.ebay.com/Alleva-Coppolo-...D-/250699928630?pt=Guitar&hash=item3a5ee15436

1. If Jonno would have let me know he was selling that bass I never would have waited 14 months for mine. And if I new it was leaving the country I probably would have ordered mine clear with a black pickguard.

2. They are asking more then I paid for my LM5 brand new to my specs.

Great bass bad deal...
 
As an eBay Associate, TalkBass may earn a commission from qualifying purchases.
Siblings are finished and already shipped!:hyper:

Both Surf Green... but Brian's nitro and mine's poly, plus They come from different painters.

DSC04609.jpg



:bassist:
 
Status
Not open for further replies.