Hi, have you checked out this post about headphone volume HERE? Although it talks about headphone volume the same screen shows the output levels for jacks and XLRs. Hope it helps.
Enjoy the benefits of a premium membership!
Upgrade Account
-
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Darkglass Anagram Multi FX Announced
- Thread starter Elmstreet
- Start date
This!
Way more than enough headphone volume ever needed by tweaking under Device Settings.
Hi All,
I'm having a small problem with my anagram. I suspect this will involve a call to their customer service team, but I figured I'd check here first. I have no idea why, but my effects loop appears to have stopped working - totally.
I've gone into the device setting and made sure that the loop is set to mono out - mono in, which is what I believe is the correct configuration as I am just using it to run external pedals to the unit. The weird thing is it was working when I first received the unit, but today when I went to route my way huge pork and pickle though the effects loop, it simply isn't working.
Now, there is sound when it's running, but it's at a significant volume drop, even with the output level on the effects loop set to 0 db. All I get is an unaffected sound at a much lower volume level than when the effects loop is disengaged, I also get an odd high pitched wining sound when the effects loop is on.
Now, I have done some troubleshooting.
Patch cables - checked and tried others
pork and pickle - works fine on it's own or when running before the anagram
Internal setting on the anagram - effects loop is set to mono out mono in
And again, the effects loop was working a couple of days ago. I'm generally confused here and wondering in anyone else has run into this, and found a way to resolve it?
Thanks.
I'm having a small problem with my anagram. I suspect this will involve a call to their customer service team, but I figured I'd check here first. I have no idea why, but my effects loop appears to have stopped working - totally.
I've gone into the device setting and made sure that the loop is set to mono out - mono in, which is what I believe is the correct configuration as I am just using it to run external pedals to the unit. The weird thing is it was working when I first received the unit, but today when I went to route my way huge pork and pickle though the effects loop, it simply isn't working.
Now, there is sound when it's running, but it's at a significant volume drop, even with the output level on the effects loop set to 0 db. All I get is an unaffected sound at a much lower volume level than when the effects loop is disengaged, I also get an odd high pitched wining sound when the effects loop is on.
Now, I have done some troubleshooting.
Patch cables - checked and tried others
pork and pickle - works fine on it's own or when running before the anagram
Internal setting on the anagram - effects loop is set to mono out mono in
And again, the effects loop was working a couple of days ago. I'm generally confused here and wondering in anyone else has run into this, and found a way to resolve it?
Thanks.
IvanBassist
Commercial User
- Jun 8, 2008
- 3,743
- 11,118
- Disclosures
- Content Manager at Darkglass Electronics, Dingwall Guitars Artist
I've be doing some research and I think I might have to do a "reinstall from file" of the firmware. Do you think this might resolve the issue?
IvanBassist
Commercial User
- Jun 8, 2008
- 3,743
- 11,118
- Disclosures
- Content Manager at Darkglass Electronics, Dingwall Guitars Artist
Yes, if the effects loop blend is 100% wet. Well, it's not totally dead, but there is barely a signal.
Actually, the volume seems better, but still no effect from the external pedal.
IvanBassist
Commercial User
- Jun 8, 2008
- 3,743
- 11,118
- Disclosures
- Content Manager at Darkglass Electronics, Dingwall Guitars Artist
Yeah, I assume it's a multi-band compressor named "Syntropia" or some other play on Entropia. It'll be cool to switch between the two blocks as a clean and dirty channel.From 1 to 10 how much is the New block a MBC? @IvanBassist
IvanBassist
Commercial User
- Jun 8, 2008
- 3,743
- 11,118
- Disclosures
- Content Manager at Darkglass Electronics, Dingwall Guitars Artist
For the newer members of the Anagram community:
- Release time (approx.) in your local city for this upcoming release - Event Time Announcer - Anagram KosmOS v1.13 Release
- More detail on the release process - When and how often does Darkglass release updates for the Anagram?
The Anagram has been the main part of my tone for almost a year now since it released and I don't see that changing anytime soon.
How is no-one talking about the new update!?!
Incredibly deep 3 band compressor plugin, and finally global input gain settings for up to 6 different instruments!
Darkglass is cooking right now!
Incredibly deep 3 band compressor plugin, and finally global input gain settings for up to 6 different instruments!
Darkglass is cooking right now!
Especially excited about this one. The input gain feature is so unbelievably helpful and the multi-band comp will be very fun to fiddle with. Definitely something I've noticed with the current blocks is that, at least with my every day bass, it's tough to get an even gain reduction because the lower frequencies hit them pretty hard...
