• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join free Log in
    Want zero display ads or expanded classifieds tools? Compare plans.

DNA Owners Group

#582
Rip Van Dan said:
You'll love that cab. I have the 8 ohm version because my older Eden amp bridges to 800-watts at 8 ohms. That 410 really is a one cab solution if you want it to be.
Click to expand...

The 2X10 has been great as a stand alone cab. We have about 8-10 venues we cycle through regularly. The 2X10 works fine for most but I’ve found myself in a couple of spots where I’ve had to push it to its limits. We also never know when we might get a call to play some bigger stages (happened last weekend) and even though I pulled it off with the 2X10 I’m just ready to get the big dog and call it done. It won’t see a ton of use but it’ll be good to know it’s there when I do need it!
 
  • Like
Reactions: iriegnome and Rip Van Dan
#583
jjk2007 said:
The 2X10 has been great as a stand alone cab. We have about 8-10 venues we cycle through regularly. The 2X10 works fine for most but I’ve found myself in a couple of spots where I’ve had to push it to its limits. We also never know when we might get a call to play some bigger stages (happened last weekend) and even though I pulled it off with the 2X10 I’m just ready to get the big dog and call it done. It won’t see a ton of use but it’ll be good to know it’s there when I do need it!
Click to expand...
My biggest problem is finding a place where I can really unleash it. I've played it outdoors a number of times so far and everytime I turn my 800-watt Eden amp up to 10 o'clock, I get asked to turn down. I've only been able to run it up at 10 o'clock on the master when we play festivals. Otherwise 9:30 is about the max I can run it indoors or out. it's an absolutely GREAT cab!
 
  • Like
Reactions: jjk2007 and iriegnome
#585
Happy new owner of a DNA 800. What do ya ll recommend for a cab. I'm trying to keep up with a loud drummer and 2 guitars with full Marshall stacks. I'm thinking about getting the dns 410 4 ohm. From what I have seen searching , this should do the job with no problem. I am open to suggestions though. Currently running it into a hartke 410 xl 8 ohm but it just doesn't do the amp any justice.
 
  • Like
Reactions: iriegnome
#586
44972027_2205806906109619_568566250226057216_n.jpg


My DNA 800 sits on top of a DNS 112 and a Bag End S15d. I play on stage with 2 full trap drummers and 3 guitar players using Fender Twins!
Plenty of headroom. Tons of tone.
 
#588
mdalamond said:
Happy new owner of a DNA 800. What do ya ll recommend for a cab. I'm trying to keep up with a loud drummer and 2 guitars with full Marshall stacks. I'm thinking about getting the dns 410 4 ohm. From what I have seen searching , this should do the job with no problem. I am open to suggestions though. Currently running it into a hartke 410 xl 8 ohm but it just doesn't do the amp any justice.
Click to expand...
Great choice. I have the DNS410 myself. I got it in 8 ohm because I'm running an older Eden amp bridged at 800 watts @ 8 ohms into it. You will shock your folks with the full Marshall stacks, because this guy will do the trick no problem. It is a very loud and incredibly clear and articulate cab. You'll love it!
 
  • Like
Reactions: mdalamond and iriegnome
#590
mdalamond said:
My local dealer made me a deal I just could not refuse on a brand new DNA DNS 410 with the truck liner instead of the rat fur. Not that I really have a preference but it may be easier to keep the cat hair off :thumbsdown:. Supposed to be in tomorrow. Happy new cab almost day. :bassist::hyper::hyper::hyper:
Click to expand...
Cool! That’s the Neo cab with rhino type finishing.
 
  • Like
Reactions: mdalamond
#593
IMG_1673.JPG
Well the 410 didn't happen. Something happened with shipping and I could have waited till next week BUT.. After a lot of thought I decided on a 2 - 112N Rhino set up. I wanted something easier to load in/out. It didn't make much sense to get rid of an 80# cab only to get another cab close to 80#.
I will say I am very happy with my decision. The 112s are amazing. I can't get over the clarity. Amazing low end. These thing just flat out rock. Maybe someday there will be a 1350 in my collection and a 410 , but for now I am very satisfied.
Pics or it didn't happen , here ya go.
 
  • Like
Reactions: jeff7bass, Bassmann1968, jjk2007 and 2 others
#595
mdalamond said:
View attachment 3518287 Well the 410 didn't happen. Something happened with shipping and I could have waited till next week BUT.. After a lot of thought I decided on a 2 - 112N Rhino set up. I wanted something easier to load in/out. It didn't make much sense to get rid of an 80# cab only to get another cab close to 80#.
I will say I am very happy with my decision. The 112s are amazing. I can't get over the clarity. Amazing low end. These thing just flat out rock. Maybe someday there will be a 1350 in my collection and a 410 , but for now I am very satisfied.
Pics or it didn't happen , here ya go.
Click to expand...
Nice! I’m still in the process of budgeting for my 410 cab. I bet that 212 stack sounds great!
 
  • Like
Reactions: mdalamond
#600
mdalamond said:
What is everyone using to carry their 800 heads in. I don't really want to rack mount. Just looking for a simple bag or hard case. I've been searching the gator site and such but there's a lot to go through. Also need on for my GB Shuttle 6.0. Anybody have any ideas?
Click to expand...

I keep my 1350 in a gigskinz mixer bag. Bought it at GC. Fits in perfectly. Not sure if they make anything smaller.

Link Removed

Link Removed

Link Removed
 
  • Like
Reactions: Bassmann1968

Latest posts

Top Bottom
Back