• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

EBMM StingRay Special Club

It's all about the 5H for me. I love being able to switch to series.

I'm still tempted to get a HH or HS at some point
I’d be very interested in an HS if they were to bring back that configuration.

Actually, did their HS models have a phantom coil in them? I’m guessing they did, but I don’t remember.
 
I checked that one out also. Sonically, it could have been a great addition for me since I already have a 2007 ceramic SR5HH and a 2019 SR Special 5HH. An alnico model from the era between my two basses is something I’d like to add someday. But I’m not ready to buy a new bass right now and, sorry if this sounds shallow but, it’s not a color I’d buy.
 
  • Like
Reactions: PrimitiveMan
I checked that one out also. Sonically, it could have been a great addition for me since I already have a 2007 ceramic SR5HH and a 2019 SR Special 5HH. An alnico model from the era between my two basses is something I’d like to add someday. But I’m not ready to buy a new bass right now and, sorry if this sounds shallow but, it’s not a color I’d buy.

Wasn't that stoked on the color either

Trying to wait until the new year to buy anything. And my next purchase will probably be a fretless
 
They did - I saw an 5HS for sale here 2 days ago and looked up the diagram. The 5-way switch is identical to the 5HH, but have and S and Phantom in the neck position.

For Sale:
For Sale - 2014 EBMM Stingray 5 HS

Control Diagram:
https://s3-us-west-2.amazonaws.com/...ments/pickups/bodies-2/body-58.jpg?1571343282
Nice looking bass. But my Sandberg fills this slot for me and weighs barely 9lbs. This one is over 10 lbs. That alone would make it a no go for me. They didn’t make that many . Finding a 5 string one 9lbs or less is like a needle in a haystack.
 
  • Like
Reactions: dave64o
Ok so quick question:

The MM setup guide says to set the pickups to x height for the G string and then the bass side to be parallel with the pickguard. But what kind of parallel? Parallel as in sunken flush into the pickguard/body or parallel as in 90° with the pickguard which wouldn't really be posible because of the slant that setting the G string would create?
 
Ok so quick question:

The MM setup guide says to set the pickups to x height for the G string and then the bass side to be parallel with the pickguard. But what kind of parallel? Parallel as in sunken flush into the pickguard/body or parallel as in 90° with the pickguard which wouldn't really be posible because of the slant that setting the G string would create?

I think you're confused on the definition of parallel. Neither of your examples would mean parallel.

They mean parallel as in even from the bridge to neck side, and from the treble to bass side. So even all the way across. Not slanted at all. And certainly not flush with the pickguard. It's not an instruction on the height of the pickup, just an instruction on the angle (should be same height on all four corners).

That's the factor setting but you can do whatever you want. I think I have the bass side of the pickup very slightly lower than the treble side actually. Because I found the B string a tad louder when it was totally even
 
That's the factor setting but you can do whatever you want. I think I have the bass side of the pickup very slightly lower than the treble side actually. Because I found the B string a tad louder when it was totally even

Same with my 4H. When I set it up parallel as instructed, the E string was overbearing everything else. So I lowered it quite significantly on the E string side. Just use your ears! :)
 
Same with my 4H. When I set it up parallel as instructed, the E string was overbearing everything else. So I lowered it quite significantly on the E string side. Just use your ears! :)

Yup, use your ears is always good advice for musicians!

Everyone's attack on the strings will be a little different, so no setting will work for everyone.

I have my pickup higher than EBMM factory setting as well
 
I think you're confused on the definition of parallel. Neither of your examples would mean parallel.

They mean parallel as in even from the bridge to neck side, and from the treble to bass side. So even all the way across. Not slanted at all. And certainly not flush with the pickguard. It's not an instruction on the height of the pickup, just an instruction on the angle (should be same height on all four corners).

That's the factor setting but you can do whatever you want. I think I have the bass side of the pickup very slightly lower than the treble side actually. Because I found the B string a tad louder when it was totally even

Holy im so dumb. You are so right.
 
  • Like
Reactions: PrimitiveMan