Fearful 12/6/1 cubes are built

[happychicken]

Ok starting it up now!

 

[happychicken]

I mean wiring it up ha

 

[happychicken]

Arg!!

Another question on the wiring. I have a input jack board with two speakon and two 1/4 jacks. Now I see how to bridge the two speakons. Do I do the same for the 1/4 inch hacks and then connect the wires going to crossover somehow?

 

[happychicken]

That was unclear. I mean do I bridge the 1/4 jacks the join the wire from them going to crossover to the wire from speakons going to crossover

 

[mbelue]

Yes connect the tip of the 1/4 Jack to 1+, connect the ring to 1-.

Do the same for the second Jack. Why did you get 1/4" anyways? Vintage head?Adapter and cables are easier than whisteling holes, IMO.

 

[happychicken]

I have never used speakon until I just got my mesa subway which only has speakon out. I think I'm just going to cover the 1/4 jacks and forget it.

 

[mbelue]

I have never used speakon until I just got my mesa subway which only has speakon out. I think I'm just going to cover the 1/4 jacks and forget it.

Just make sure they're air tight. High wattage in a Fearful makes holes whistle.

 

[Downunderwonder]

Just make sure they're air tight. High wattage in a Fearful makes holes whistle.

Doesn't the kitset come with fancy 1/4" plugs?

 

[happychicken]

It was an option to buy a plate with two speakons and two 1/4 jacks. I am probably just going to close them up. I don't need whistling

 

[dukeorock]

I don't ever put 1/4" jacks on a cab unless the customer insists, and even then I try to talk them out of it. I keep a special cable around incase someone wants to use an older amp with one of my cabs

 

[happychicken]

Yeah I guess I just thought it would be good to have both options but it looks like im living in the past!

 

[lelandcrooks]

Doesn't the kitset come with fancy 1/4" plugs?

Yes, although I wouldn't exactly call them fancy. They work well though.

 

[happychicken]

Wiring went fairly well so far thanks to a pic I found on the greenboy site. I decided to use Lelands simpler hook up than the one with the terminal. Now I arrive to this thing and I have no idea where it goes.

 

[mbelue]

View attachment 784923 Wiring went fairly well so far thanks to a pic I found on the greenboy site. I decided to use Lelands simpler hook up than the one with the terminal. Now I arrive to this thing and I have no idea where it goes.

Between the tweeter crossover and the tweeter.
There's a diagram on the Greenboy website.

Also it belongs I the last hole in your cabinet. After handles and your speakon plate there should be one more hole.

 

[happychicken]

Only holes are the ones for drivers in baffle and one on the back for jack plate

 

[mbelue]

Only holes are the ones for drivers in baffle and one on the back for jack plate

@lelandcrooks can answer that.

It might be time for a hole saw.

 

[happychicken]

Oh joy

 

[lelandcrooks]

You just need a paddle bit. I don't drill the holes for the lpad because everybody wants them in a different spot. 1/2" IIRC.

 

[happychicken]

1/2 would be small no? I have to drill a hole large enough for that tapered cone that extends

 

[happychicken]

From the back of the black switch into the box correct