TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
Has anyone made a pedal for the overdrive on the Rumble?
Is it just a momentary N/O switch, or different?
Yes, I made one. Not a momentary, you need a latching N/O switch. Well, you could use momentary, but the overdrive would only be on as long as you were holding the footswitch down. You only need a SPST, which are kind of hard to find on pedal parts websites, but any latching footswitch will do...you'll only need two of the lugs. you wire the positive (of a regular guitar cable) to one lug and the negative to the other. The switch basically closes the loop and grounds out the line, which causes the channel to switch. Opening the ground back up switches back.
Would an old auto high beam footswitch work?
Have been waiting three weeks for the local Fender dealer to get a new shipment of amplifiers. Love my Rumble 40 but am in the market for something bigger. Really want to pick up a Rumble 500 combo for my Friday night jam sessions. Some of the other players keep telling me to go elsewhere and just buy something, but I'm holding out. If I'm going to drop that kind of money, it's going to be for something I really want.
.
I don't see why not, might be kind of cool. I reckon any open/close switch with no built in resistance will do if you can solder patch cable wires to the lugs/leads/posts.
I just picked one of these up at my local dealer.......less than a $20 bill.
Fender Single-Button On/Off Footswitch | Sweetwater.com
Yes, I made one. Not a momentary, you need a latching N/O switch. Well, you could use momentary, but the overdrive would only be on as long as you were holding the footswitch down. You only need a SPST, and those are kind of hard to find on pedal parts websites, but any latching footswitch will do...you'll only need two of the lugs. you wire the positive (of a regular guitar cable) to one lug and the negative to the other. The switch basically closes the loop and grounds out the line, which causes the channel to switch. Opening the ground back up switches back.
I just picked one of these up at my local dealer.......less than a $20 bill.
Fender Single-Button On/Off Footswitch | Sweetwater.com
Has anyone made a pedal for the overdrive on the Rumble?
Is it just a momentary N/O switch, or different?
My Rumble 200 is on it's way! To be delivered Friday.
My Rumble 200 is on it's way! To be delivered Friday.
After careful consideration of our band's circumstances, I decided the 40 that I had just got a few weeks ago wasn't going to cut it. I was still within Sam Ash's return window so I sent the 40 back last week, got my credit and then waited for the 200 to come in stock, which it did Monday.
Can't wait to get it on stage. Now all we need is a gig.![]()
Yes a play on words of 'Ramble On'. Fender Rumble Club founder Bumble Bee started the whole Rumble On thing.Led Zeppelin, right?
Yes, I had considered going that route. Decided to wait it out and buy an amp from the local dealer, though. He runs a small shop, has been very patient and helpful with me when I bought my bass and small amp. I can manage with that one for another week or two. Hopefully it won't take longer than that!Musicians Friend shows Rumble 500 V3 Combos in stock ready to ship right now. Fender RUMBLE 500 2x10 500W Bass Combo Amp | Musician's Friend
Yes, I had considered going that route. Decided to wait it out and buy an amp from the local dealer, though. He runs a small shop, has been very patient and helpful with me when I bought my bass and small amp. I can manage with that one for another week or two. Hopefully it won't take longer than that!