• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Future Impact now available!! WAS: deep impact reissue!!! interested?

I mentioned another bass and a compressor in the context of troubleshooting the issue, not a full time solution. Perhaps if you could post a video of the issues it would help.
at this point, I believe the "issues" are part and parcel of the problems that plague pitch conversion bass synths. I am spoiled by 13-pin technology, and whatever voodoo the Sy-300 performs to achieve its latency-free tracking. I find that adjusting the parameters helps, but I will await the opportunity to use the PC editor before I pass a final judgement. These are my first impressions, after putting the pedal through its paces in a home setting for a few days
 
at this point, I believe the "issues" are part and parcel of the problems that plague pitch conversion bass synths. I am spoiled by 13-pin technology, and whatever voodoo the Sy-300 performs to achieve its latency-free tracking. I find that adjusting the parameters helps, but I will await the opportunity to use the PC editor before I pass a final judgement. These are my first impressions, after putting the pedal through its paces in a home setting for a few days
yeah, you cannot compare to a v-bass system. if you play very fast and busy lines, it will glitch eventually. try fingering as much as possible on the same string for faster runs (for example major thirds), that helps. i had to "adapt" my technique a little as well, i am very well trained technically and a professional bass player. you will not be able to play all the lines you play normally on the bass.
 
yeah, you cannot compare to a v-bass system. if you play very fast and busy lines, it will glitch eventually. try fingering as much as possible on the same string for faster runs (for example major thirds), that helps. i had to "adapt" my technique a little as well, i am very well trained technically and a professional bass player. you will not be able to play all the lines you play normally on the bass.

Pretty much what I assumed going into the FI. There is a limit to what can be accomplished with pitch to MIDI conversion.
 
  • Like
Reactions: Adamixoye
try playing a very active bassline, with octaves or 16th notes at brisk tempos, and tell me what you hear
You can certainly overwhelm it if you play very fast but compared to the Markbass, EHX or Boss (only own the markbass now but I've had the others) it feels better to me. I play with finger style with flatwounds and I can't hear any latency on most patches.
 
But this is not Pitch -to-midi coversion, is it?
well yes and no :-) there is no midi note output, but the pitch gets recognised and the synth part of the pedal is controlled by it. so basically it does everything a pitch-to-midi pedal has to do as well. what i find far more accurate then other pedals is the attack recognition. if you mix in a little distorted bass sound for the attack (the ad distortion setting) you can get very good results. so tracking depends a little on the patch as well.
 
maybe the sensitivity is set too high? when i have it set to high i get some false triggers. also keep in mind that you have to play monophonic, no notes should overlap. other than that i am baffled. i can make it glitch of course, but to say that the pedal is very glitchy seems hmm, wrong...
Is
I play cleanly, with excellent right and left hand technique,and am familiar with bass synths, such as Korg G-5, boss sy-300, Roland V-bass, all of which i own or have owned. I like the instrument I'm using.. If i have to buy a compressor, and use a different instrument to get the pedal to function optimally, it seems a bit of a stretch, wouldnt you say?
nit every pedal works for every person so that's fine I can live with that
But if the pedal is overall not "right" that's a different issue