EdwardofHuncote
I Still Dream of Jeannie
- Aug 21, 2013
- 6,651
- 2
- 16,418
- Disclosures
- I privately own and operate a local musical instument repair shop.
They can be tricky.
Pay attention to the orientation of the slots cut in the pins. These are to give relief for the string. Take pains to put the same pin back in place on each string as well. Use the pin to press the new string into place, rather than pushing the new string into the bridge further than necessary, pushing the pin in, then pulling the slack out.
This'll sound crazy too - but moistening the wood pins will swell them slightly... maybe just enough to bind in place.
Pops used to tell me - "you wadn't holdin' yo' mowf right."
Pay attention to the orientation of the slots cut in the pins. These are to give relief for the string. Take pains to put the same pin back in place on each string as well. Use the pin to press the new string into place, rather than pushing the new string into the bridge further than necessary, pushing the pin in, then pulling the slack out.
This'll sound crazy too - but moistening the wood pins will swell them slightly... maybe just enough to bind in place.
Pops used to tell me - "you wadn't holdin' yo' mowf right."