TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
How many bass strings have you broken?So far i've broken four guitar strings this year. Broke the g after doing a truss rod adjustment. Broke at pitch.
I've never seen that either. I've seen some guys here taking about strings unwinding while restringing, but ive never seen it. I have a box with somewhere at least100 set of used strings in it and they are all still exactly how they were when they came off the instrument. Maybe flats or tapes would unwind easier? Idk.Outter wraps start to separate maybe
I meant separating the wraps from each other, not from the inner wrap.I've never seen that either. I've seen some guys here taking about strings unwinding while restringing, but ive never seen it. I have a box with somewhere at least100 set of used strings in it and they are all still exactly how they were when they came off the instrument. Maybe flats or tapes would unwind easier? Idk.
I misunderstood. I know what you are talking about but haven't seen it. Now im curious to know what basses have saddles capable of that. All my basses have had longish saddles with a rather relaxed, gradual angle.I meant separating the wraps from each other, not from the inner wrap.
It usually happens at the bridge when the angle is too pronounced.
It means the string is under great preassure.
IME it's been at the tuning peg in cases where the peg was machined with too sharp an edge. Silks provide some protection, and filing the sharp edge down can also help.I meant separating the wraps from each other, not from the inner wrap.
It usually happens at the bridge when the angle is too pronounced.
It means the string is under great preassure.
Ah. I always put keys with large post on my instruments less winding but now I know it has an extra benefit. ThanksIME it's been at the tuning peg in cases where the peg was machined with too sharp an edge. Silks provide some protection, and filing the sharp edge down can also help.
So far one. A low E. Only gotten it up to B flat. Caught me by surprise. Other than that none that I remember. Maybe Bass is a good choice. Those strings are strong. I've broken lot of guitar strings.How many bass strings have you broken?
Your aiming for the b flat below the e and not above it correct? I just wanna make sure. You never know on the net.So far one. A low E. Only gotten it up to B flat. Caught me by surprise. Other than that none that I remember. Maybe Bass is a good choice. Those strings are strong.
Your aiming for the b flat below the e and not above it correct? I just wanna make sure. You never know on the net.
Ok. Just wanted to make sure you weren't passing e during tightening. Like I said, you never know on the net.Above. Sixth fret of the low E

My God child is on the spectrum and this is very typical behavior for him. So like you said, patience and the benefit of the doubt is warranted . At least for now. Being autistic isn't always what people think it is. My God son is brilliant , he just gets stuck on some things. I think he has his mom's ocd on top of everything which doesn't help.OP has stated in another thread that he is autistic. Perhaps we should give him the benefit of the doubt until proven otherwise? He even states and his profile that he is obsessed with string breakage..