• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

I wanna see some unique basses

CFBzQ97.jpg


Built by scottyd a few years ago, who used to frequent this forum. It's bounced around the forum a few times before landing in my hands. As far as I know, this is the only four-string single-cut bass he made with a buckeye top

8.8lbs
34” Scale 4 string
Fretted 24 frets (with zero fret) approx 1 and 5/8 width at zero fret (nut width)
Set Neck
SC-V shape

Buckeye Burl top
Curly Swamp Ash body core
Spalted curly maple back
Wenge accent veneers between body laminates
3 laminate neck of hard maple and Wenge (M/W/M)
Mac Ebony fingerboard

16” radius fingerboard
Side markers, white
Single truss rod, heel access

Hipshot B style bridge 20mm spacing
Hipshot Ultralite tuners
Wooden knobs to match top
All black Hipshot hardware
High gloss poly finish with satin neck

2 Redeemer stacked humbuckers W/matching pickup covers
Audere Classic 4 band preamp

scottyd is a talented builder I miss his posts in the Luthier's corner
 
A couple basses made by the Guitar Factory in Orlando. Note the Kahler whammy on the 4:

GFbasses_zpsee485cad.jpg


Late 60's Realistic (yes, THAT Realistic) violin bass, mde in Japan by the Matsumoku company:

RSBassMicroVR_zpsa5e5ae23.jpg


RSBassFrontHeadstock_zps5aed6ceb.jpg


And of course, my best bass:

Washtub_zpsa423fc4f.jpg
 
Here is my Krappy Little Dragon Wing, EAD six string Octave course.

file-2.jpg


And since you asked for unique, and not necessarily pretty, here is my Oak Burl Jazz bass. How many trees do you know that would grow a burl in the shape of a Jazz bass?

file-93.jpg

file-82.jpg

file-54.jpg

file-105.jpg
 
These basses everyone is posting all rule so hard!!!

Here's a bass I'm just finishing up. I guess it's not SUPER unique, but a bit different....

This was my wife’s old Squier P Bass that I had bought off of her while we were still dating. I went to college and didn’t take the bass with me, it sat in a closet for 4 years and I didn’t dig it out for another almost 2 years after college.

Fast-forward to about a month ago, I get the idea to redo the bass completely. Swapped the stock Squier pickups for a set of Lace Aluma-P’s, wired them so that they can either be summed to one output jack, or split so that the top pickup is used for the two lower strings, and the bottom pickup is used for the four higher strings.

I also drilled and installed two new Grover Mini tuners and added a new Schaller 8 string bridge, along with installed a brass nut from AxeMasters and installed 2 octave strings on the D + G strings. Essentially the idea was to play the bottom half like a guitar and the top half like a bass. Ive been experimenting with different ways of playing the bass, but I’m having a lot of fun with it.

Definitely a fun, easy, worthwhile modification!

tumblr_mshnp6wDUa1qctle2o1_500.jpg
 

Latest posts