- Feb 12, 2006
- 61,010
- 5
- 220,854
- Disclosures
- Development Engineer-Mesa Boogie, Development Engineer-Genzler (pedals), Product Support-Genz Benz
Thanks for the link, but it does not state the efficiency, or the frequency range for that matter. Actually, I’ve been to the site before and could not find this information, which is why I’d though I’d give you a try. Listen, I’ve taken enough of your time. Thanks much.
Sure it does (in order 112, 115, 210):
Average Sensitivity (RMS) (50Hz-1000Hz)
Average sensitivity based on an RMS signal from 50Hz - 5kHz
97.5dB/1W/1M 98.5dB/1W/1M 98.1dB/1W/1M
Low Freq F3 (Hz)
-3dB point of the LF response below the average response
57.5 Hz 56.6 Hz 53.6 Hz
Low Freq F6 (Hz)
-6dB point of the LF response below the average response
48.1 Hz 47.2 Hz 48.0 Hz
Low Freq F10 (Hz)
-10dB point of the LF response below the average response
41.5 Hz 38.1 Hz 42.1 Hz
High Freq Response
Nominal HF response, dependent on the position of HF attenuator
>12kHz >12kHz >12kHz