• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Kustom 200 tuck and roll?

Greetings from the North,

It was the late 60's man........I can't remember ;)

Not being aware of ohms at the time I did run mine with a Kustom 315 btm and on occasion I lent it out to a friend that ran it with two 215 Kustom btms and it didn't go crispy. Maybe somebody else can chime in but I don't remember any labels saying 8, 4, or 2.

Rezdog
 
their output jacks are in parallel. when you use one, you're running the head at 8 ohms (their 2x15 cabs had two 16 ohm speakers in parallel for an 8 ohm load) and when you used two of their cabs using the jacks on the back of the head, you're running it at 4 ohms. so basically, you can run an 8 or 4 ohm load on the head (be it one cab or two).
 
i don't have any for sale, but there's a couple of them on ebay. one is a buy it now for $150 and the other one is at $40 with 6 days to go. the cab would sound ALOT louder with the JBL's since they're rated at 100db sensitivity from 100hz-2.5Khz, whereas the Eminence CA154's are rated at 96.9db.