It didn’t last very long…Very nice thanks for sharing
TalkBass has been independent since 1998. Add your voice.
Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
Join free Log in
Want zero display ads or expanded classifieds tools? Compare plans.
It didn’t last very long…Very nice thanks for sharing
Looks like an early 55-02, for you cats into such things
[Invalid or Expired Link Removed]
I'm sure this has been asked before, but is there a known algorithm to the serial numbers, I would like to get information about a recent acquisition. Other than contacting Lakland direct that is.
that, or you can reem out the hole a bit.
I added a 1/2" Hipshot extender to my Skyline 44-02 a couple months ago. I had to sand out the headstock hole a tiny bit to get it to fit, which Lakland let me know might be necessary.Lakland experts: I need some help. I recently bought a Hipshot Ultralite extender for my USA Classic 44-64. Per Lakland’s recommendation, I bought the 1/2” model.
I went to install it today, and it doesn’t fit. The smaller part of the shaft fits fine, but it stops when the threaded part has to fit. The headstock hole isn’t big enough.
Do I need the 3/8” model? It’s strange that this one won’t fit despite Lakland specifying that I needed the 1/2”.
I added a 1/2" Hipshot extender to my Skyline 44-02 a couple months ago. I had to sand out the headstock hole a tiny bit to get it to fit, which Lakland let me know might be necessary.
Same question, but for a recently acquired Semihollow, which I posted elsewhere but not here.A question on hardshell cases. I bought a nice used 55-02 a couple months ago. The bass is in great condition but the case is pretty beat up, so I am looking for a new hardshell case. I don't see them offered on Lakland's website, and I found several listings from online music stores for a Lakland case but they are discontinued.
So, any recommendations on a good hardshell case for my 55-02?
The Hipshot I got* for my Skyline required getting an additional 5/8" adapter nut to fit properly.This one might take more than sanding. The threaded part of the stem won’t go in at all. It would probably take some extra routing, which I’m not about to attempt on my own.
Pricey, sometimes you can find them used on here. But the gold standard for me.
Fender Jazz Bass Hardshell Case