• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

Low Down Sound Club, Part Four

I never heard a 4x8 cab before and it was only $200. The guys there suggested throwing a 115 under it. I think the cab was older as it was beat up.

A few days ago I asked Don about a second Faital 115 at 4 ohms to run my Mesa at 2 ohms and he said there would be too much bass and volume. Then I thought of 2 12/6 cabs and Don said they would be very hifi sounding.

I like the Mesa through my 2 Bergantino HD112'S. There is an impressive amount of bass and low mids from the cabs that make the Mesa sound phenomenal.
 
"sam ash 4x8; older"

Almost certainly an SWR Henry Jr.
Merely an ok cab; and nowhere near as good as the stuff Don does.

The SWR Henry the 8x8 was a nice enough cab, much better than their 4x8; I've had two of those over time, I still greatly prefer the LDS stuff I have.
 
  • Like
Reactions: bradjonesbass
As much as I love the idea of a vertical 2 x 28 set-up (& always have), I just can't ever justify it because the only 8s I'd want are the 8PR200s (*** edited...or the Ciare NDC8-3s ***). They cost almost the same as the 3012HOs (the Ciares are more :woot:). A 3012HO moves a hair more air & is 2.5dB more sensitive than a pair of 8PR200s. And a pair of 8PR200 28 cabs has a 2-ohm load leaving you w/many fewer amp choices than the 4-ohm load from a pair of 3012HOs (whether it's a 212 or 2 x 112). And if it's a 212, you save even more because it's a single box rather the 2 separate boxes of a 2 x 28. The only real, true advantages of a 2 x 28, from my perspective, are the smaller footprint, the "coolness" factor :cool: (& they do look pretty cool), & the amazed looks you'd get from g*****ists & other bassists when they heard what these 2 little boxes could produce ;). So I guess the only way I'll ever have a 2 x 28 is if someone else has a pair made & I buy them 2nd hand (or I hit the lotto :D).
 
Last edited:
So...I was looking for a single cab solution that would cover 90% of what I do. I needed loud, low and light.

When all of a sudden this popped up on local classifieds as well as TB. These are super rare in Canada as the shipping and customs expense make it a little cost prohibitive.


LDS_zpse75c0551.jpg



So I went and took it for a test drive - with the sellers MB800, then my PF800, then my PF800 with VT Bass in front.

So then I took it home!

This cab delivers as billed. Its loud, low and light - as well as being super crisp, clear and clean - literally delivering whatever you feed it.

I play mostly hard rock and I like a little bit of dirt. My PF800 with VT Bass brings the dirt - and this cab delivers that dirt clean.

Honeymoon phase officially on! First real test will be band practice next weekend
 
Great cab and good luck with it. My Faital Pro 115 from Don is the clearest 15 inch driver I have ever heard. the box is the same length as my Ampeg V4B and weighs less than my much smaller Bergantino HD112. I saw this cab i the classifieds and probably would have grabbed it if it wasn't in Canada.
 
Put my down payment down on a 2x12 with 3012LFs, a 6.5" Faital mid driver and Eminence 1001 tweeter. Came to just under $800USD (a bit more here in Canada, but then again what isn't) and I couldn't be more excited. We're not going with a fEARful design, I've always wanted a vertically stacked 2x12 cab, so it'll be the two 12s sitting on top of each other with the horn and the mid in the top right and left corner. Black tolex, plastic corners and metal handles estimated at about 65lbs. Box dimensions (estimated) 32"h x 20"w x 16"d.

One month of waiting and I'll have my cab!
 
Put my down payment down on a 2x12 with 3012LFs, a 6.5" Faital mid driver and Eminence 1001 tweeter. Came to just under $800USD (a bit more here in Canada, but then again what isn't) and I couldn't be more excited. We're not going with a fEARful design, I've always wanted a vertically stacked 2x12 cab, so it'll be the two 12s sitting on top of each other with the horn and the mid in the top right and left corner. Black tolex, plastic corners and metal handles estimated at about 65lbs. Box dimensions (estimated) 32"h x 20"w x 16"d.

One month of waiting and I'll have my cab!


Congrats! Please post pics. Still loving mine and was thinking about getting a 2x12 myself. Will yours be 4 or 8 ohms? Also, how did you sort out shipping and customs?
 
Congrats! Please post pics. Still loving mine and was thinking about getting a 2x12 myself. Will yours be 4 or 8 ohms? Also, how did you sort out shipping and customs?

It will be a 4 ohm cab, shipping it to Houlton Maine which is just a skip and hop from where I live. I'll pick it up there and bring it across the border myself, should only need to pay Canadian tax since it is a product made in the USA.
 
Put my down payment down on a 2x12 with 3012LFs, a 6.5" Faital mid driver and Eminence 1001 tweeter. Came to just under $800USD (a bit more here in Canada, but then again what isn't) and I couldn't be more excited. We're not going with a fEARful design, I've always wanted a vertically stacked 2x12 cab, so it'll be the two 12s sitting on top of each other with the horn and the mid in the top right and left corner. Black tolex, plastic corners and metal handles estimated at about 65lbs. Box dimensions (estimated) 32"h x 20"w x 16"d.

One month of waiting and I'll have my cab!
Congrats. Wow, very reasonable price :thumbsup:. Can't for the life of me understand why anyone considering a new box would ever (as in ever) pick up any commercial cab. Shoot, there are inferior used "super cabs" for sale for more bucks. Color me (as long as you have a relatively knowledgeable idea of what you want) an ardent LDS fan ;).
 
Last edited:
Congrats. Wow, very reasonable price :thumbsup:. Can't for the life of me understand why anyone considering a new box would ever (as in ever) pick up any commercial cab. Shoot, there are inferior used "super cabs" for sale for more bucks. Color me (as long as you have a relatively knowledgeable idea of what you want) an ardent LDS fan ;).

And, thanks in no small part to you and your help in my thread and Don's help in choosing certain aspects of the cab, I had a pretty good idea of what I wanted. The best part was the mulitple opportunities Don gave me to consider and reconsider suggestions and ideas from both sides. We would discuss drivers and he would refer me to his buddy at US Speaker for suggestions, I would come here and ask, get more ideas and discuss them with Don. He won't ask for money until he and you both know what you want, and there was never any pressure. After receiving my quote he said "if you would like to proceed, here is my paypall info".

I'm very excited, the waiting will be the hardest part!
 
  • Like
Reactions: iualum
Put my down payment down on a 2x12 with 3012LFs, a 6.5" Faital mid driver and Eminence 1001 tweeter. Came to just under $800USD (a bit more here in Canada, but then again what isn't) and I couldn't be more excited. We're not going with a fEARful design, I've always wanted a vertically stacked 2x12 cab, so it'll be the two 12s sitting on top of each other with the horn and the mid in the top right and left corner. Black tolex, plastic corners and metal handles estimated at about 65lbs. Box dimensions (estimated) 32"h x 20"w x 16"d.

One month of waiting and I'll have my cab!

That's the EXACT cab I'm going to order! Let me know how you like it, please!
 
That's the EXACT cab I'm going to order! Let me know how you like it, please!

I'll do that. Lots of pictures, soundclips and a review will be posted here once it comes in. Just got myself a Traynor SB500H and can't wait to finally have a cab to play through. I sold my old rig (Carvin BX1200, Carvin BR410 and Carvin BR115) to fund this purchase so I had to sell it before I could buy this. Good thing I'm in the process of moving and had to quit my old band for it. Nice little break from gigs.
 
  • Like
Reactions: bradjonesbass