• TalkBass has been independent since 1998. Add your voice.
    Create a free account to reply to discussions, view embedded media, and browse with fewer display ads.
    Join freeLog in
    Want zero display ads or expanded classifieds tools? Compare plans.

News on Chunk Systems Bass Synth

It seems that a lot of people are having trouble with their units, my question is; What are you using to power it?? Remember the Chunk uses about 240-250mA at any given time so you want a GOOD power supply unit that can comfortably dish that out.

For a pedal like this, I'd be steering clear of the daisy chains. Something with isolated outputs like the PP2+ would be fine, providing you're using one of the high draw sockets. Really the best bet is to get a single regulated 9V power supply to use for the Chunk only (you can easily find these over 300mA).

I haven't had any freezing, startup errors, or any problems whatsoever from the moment I got mine. I'm using a shredfreak PSU (1500mA), just for the Chunk.
I've used it both with a daisy chain with my other effects and on it's own with a shredfreak PSU and it's frozen when using both. It definitely is something wrong with the units because many people have said their's have stopped freezing since installing the 1.003 update. Richard sent me the 1.004 beta update and it seems to be working a treat, they just have to iron out a few glitches, that's all.
 
It seems that a lot of people are having trouble with their units, my question is; What are you using to power it?? Remember the Chunk uses about 240-250mA at any given time so you want a GOOD power supply unit that can comfortably dish that out.

For a pedal like this, I'd be steering clear of the daisy chains. Something with isolated outputs like the PP2+ would be fine, providing you're using one of the high draw sockets. Really the best bet is to get a single regulated 9V power supply to use for the Chunk only (you can easily find these over 300mA).

I haven't had any freezing, startup errors, or any problems whatsoever from the moment I got mine. I'm using a shredfreak PSU (1500mA), just for the Chunk.

smartest post of the day :p I was powering it off a 100mA output of my BBE. hopefully the 200mA one is a bit underrated and it should be enough. seems stable for the moment, although I dont have the SD card installed. when I playing with it at first, I was using a 1000mA psu. worst case I'll use a dedicated one. thanks for the smart thinking :hiding:
 
sooo, I don't wanna read all these pages here...

how does this pedal compare to other synth pedals, especially the "holly trinity" (DI, G5 and BMS)?? Cause I really don't dig the samples on the CS homepage...

compare how? soundwise? programability? memory? features?

all these things have been discussed at length in this and maybe two other threads. :o

happy hunting! :)
 
Been playing around more and it just amazes me how much is packed into this little unit.

My passive Fender Jazz seems to track a little better than my Status/T-bass. I have a feeling some mild compression will help more.

Totally worth the time it takes to figure some of the functions out.

+1 I find it amazing as well, little question how much "tracking sens" do you use with the Fender
 
It looks like I may really need a synth for some club gigs I've got coming up.

To those who now are lucky enough to own one: If I bought an Octavius Squeezer would a Boss OC-2 or OC-3 pedal be completely redundant or useful to have alongside it?

one "problem" I found right know with the OS is you can't use more than one octave (or 5th) in one preset... I really hope they can upgrade that
 
Ah, screw him/her/it (just covering the possibilities here).

No, seriously, screw him/her/it, then tell her you spent six bills on an effect pedal amidst the afterglow. Better yet, tell her, then poke her in the eye. She'll be so concerned with the possible retinal disfigurement she'll probably just forget about the Octavius Squeezer.

Did I mention I'm divorced?